2885476 SEAL-O-RING Caterpillar parts
776C, 776D, 777, 777B, 777C, 777D, 793D, 854G, 992G
Rating:
Alternative (cross code) number:
CA2885476
288-5476
2885476
CA2885476
288-5476
2885476
Weight: 0.01 pounds 0 kg.
Information:
CROSS SECTION DIAMETER
5.33
mm
DASH SIZE
336
ID
72.39
mm
MATERIAL
(EPDM) 70 Duro
OD
0
mm
TRACTOR, WHEEL LOADER,
Compatible equipment models: 2885476:
Number on catalog scheme:
54
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 124-2946 Lifting Bracket 1 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00517442
Typical example
Illustration 2 g00517462
Illustration 3 g00517457
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head.
Remove bolts (2) .
Remove shaft (3), valve rocker arms (1), and unit injector rocker arms (4) as a unit with Tooling (A) .
Repeat Steps 1 and 2 for the remainder of the rocker arm assemblies.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 124-2946 Lifting Bracket 1 Start By:
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00517442
Typical example
Illustration 2 g00517462
Illustration 3 g00517457
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head.
Remove bolts (2) .
Remove shaft (3), valve rocker arms (1), and unit injector rocker arms (4) as a unit with Tooling (A) .
Repeat Steps 1 and 2 for the remainder of the rocker arm assemblies.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
777, 777B, 777D
777, 777B, 777D
777, 777B, 777D
777, 777B, 777D
793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ
776D, 777D, 777F
776D, 777D, 777F, 777G
777D, 777F
769, 772, 773B, 777
769, 772, 773B, 776, 777
769, 772, 773B, 776, 777
776, 777
0773939
SEAL
834B, 988F II
834B, 988F II
1294862
SEAL
824G, 825G, 950G, 980G
824G, 825G, 950G, 980G
6V9334
SEAL
950G, 950G II, 962G, 966G, 972G, 980G
950G, 950G II, 962G, 966G, 972G, 980G
1167540
SEAL
824G, 825G, 826G, 980G
824G, 825G, 826G, 980G
814F, 814F II, 815F, 815F II, 816F, 816F II, 966F II, 970F
1475526
SEAL-LIP TYPE
950F II, 960F, 966F, 966F II, 970F
950F II, 960F, 966F, 966F II, 970F
854G, 854K, 992G, 992K, 993K, D10, D11N, D11R, D11T
776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 854G, 992G
854G, 854K, 992G, 992K, AD30, R2900, R2900G, R3000H
24H, 24M, 735, 735B, 740, 740B, 773G, 773G OEM, 775G, 775G OEM, 776C, 776D, 777D, 777F, 777G, 784B, 784C, 785B, 785C, 785D, 789B, 789C, 793B, 854G, 854K, 992G, 992K, 993K
854G, 854K, 992G, 992K
854G, 854K, 992G, 992K