SEAL A. 2B8948 - Caterpillar

2. Remove fan guards (1).3. Remove baffle (5) from the side of the radiator. 4. Fasten a hoist to the radiator bracket assembly. Disconnect inlet hose (7) from the water pump.5. Remove three bolts (6) from each side of engine that hold the radiator in place. 6. Move the top of the radiator forward (tilt). Remove six bolts (8) and the washers that hold fan (9) in place. Remove the fan.7. Remove the radiator from the machine. The weight of the radiator is 200 lb. (90 kg).Install Radiator
1. Fasten a hoist to the radiator and put it in position on the frame. 2. Move the top of the radiator forward (tilt) and put fan (1) in position on the adapter. Install the bolts that hold the fan in place. 3. Put the radiator in position against the front support and install the six bolts that hold it to the front support.4. Connect inlet hose to the water pump. 5. Install fan guards (2) and connect braces (3) and (4) to the radiator guards.6. Connect outlet hose (6) to the elbow.7. Install baffle (5) to the side of the radiator.8. Fill the cooling system with coolant to the correct level.end by:a) install oil cooler **This operation is in the VEHICLE SYSTEMS of DISASSEMBLY AND ASSEMBLY section.