SEAL 2D9870 - Caterpillar

Illustration 1 g02904316
Typical example
(1) Tighten the drain plug to the following torque. ... 50 N m (37 lb ft)Tighten the fasteners (2) in sequence that is shown in illustration 2. Tighten the M8 fasteners to an initial torque of 7.5 N m (66 lb in). Tighten the M10 fasteners to an initial torque of 13.5 N m (10 lb ft).Tighten the fasteners (2) in sequence that is shown in illustration 2. Tighten the M8 fasteners to a final torque of 25 N m (18 lb ft). Tighten the M10 fasteners to a final torque of 45 N m (33 lb ft).
Illustration 2 g02904337
Tightening sequence for the pressed steel oil pan