SEAL 2F7964 - Caterpillar

"Radio Status" Section
Refer to table 9 for an explanation of the "Radio Status" parameters.
Table 9
Radio Status    
Status     Parameter Mode     Parameter Description    
System Id     3 digit number that represents the geographic location and service provider for the cellular radio service    
Transmit Status     Idle     Not transmitting any data    
Transmitting Transmitting data    
Microburst Coverage     Red     No cellular coverage exists in the area for the PL-102C module.    
Green Cellular coverage exists in the area for the PL-102C module.    
Microburst Registered     Red     No cellular connection between the PL-102C module and the service provider    
Green Cellular connection between the PL-102C module and the service provider    
Real Time Clock     Provides a time stamp for Product Link PL-102C module activities. The time is given in GMT.    
RSSI     Provides the signal strength received by the radio. To perform optimally, the signal strength must be greater than -120.    Product Watch Status
Product Watch allows tracking of a machines' movement. Product Watch can report if a machine moves into a specified area. Product Watch can generate a report if a machine moves out of a specified area. Also, if a machine is operated outside of a specified time period a report will be sent. Product Watch can be configured through the Caterpillar Service Tool or through Equipment Manager. Refer to table 10 for an explanation of the parameters for the Product Watch section.
Table 10
Product Watch Status    
Status     Parameter Mode     Parameter Description    
Time Based Activation Status     Active     Time Based Product Watch has been properly configured and is currently activated.    
Not Active There is currently no Time Based Product Watch properly configured and/or it is not currently activated.    
Geographical Exclusion Activation Status     Active     Geographical Exclusion Product Watch has been properly configured and is currently activated.    
Not Active There is currently no Geographical Exclusion Product Watch properly configured and/or it is not currently activated.    
Geographical Inclusion Activation Status     Active     Geographical Inclusion Product Watch has been properly configured and is currently activated.    
Not Active There is currently no Geographical Inclusion Product Watch properly configured and/or it is not currently activated.    
Time Based Alarm     On     There is an active "Time Based Alarm".    
Off There is not an active "Time Based Alarm".    
Geographical Exclusion Boundary Alarm     On     here is an active Geographical Exclusion Boundary Alarm.    
Off There is not an active Geographical Exclusion Boundary Alarm.    
Geographical Inclusion Boundary Alarm     On     There is an active Geographical Inclusion Boundary Alarm.    
Off There is not an active Geographical Inclusion Boundary Alarm    GPS Status
Refer to table 11 for an explanation of the parameters for GPS Status.
Table 11
GPS Status    
Status     Parameter Mode     Parameter Description    
GPS Position Status     Antenna Open/Shorted     There is no antenna attached to the Product Link PL-102C module or there is a problem