SEAL 2J1307 - Caterpillar

The Machine Security System (MSS) may be programmed to accommodate up to a maximum of 255 keys. A new key is programmed into the machine ECM with the service tool.Programming with a Service Tool
The "Security Management" function of the Cat Electronic Technician® (Cat ET) allows you to view information on the key currently in the key switch. You may also view a list of authorized keys. The authorized keys are the keys that have been programmed into the MSS.
Illustration 1 g06024234
Security Management
Connect a laptop computer with Cat ET to the machine that will be programmed. After the laptop computer is connected to the machine, start ET. Select the machine that has the MSS installed. Select the "Security Management" option from the "Service" menu. The "Security Management" screen will be displayed. Refer to Illustration 1.Layout of the ScreenThe "Security Management" screen has the following areas:"Current Security ID" - The "Current Security ID" area displays the ID of the currently logged-in ID. This ID can be a Radio Frequency Identification key (RFID key) or a passcode. If the "Description", "Access Level" and "Expiration" information was not entered for the ID, these areas will be blank."Display Area" - The "Security Management" display area has five columns: "Security Type", "Description", "Access Level", "Expiration", and "Security ID". The information can be sorted by a column. Click the heading of the column, to sort by the information in that column. The "Description" column is the name for the key. The "Access Level" column displays the access level for the key. There are two access levels: Master and Standard. The Master Access Level gives the user the capability to add or change information without a factory password. Standard Access Level requires factory passwords to add information on keys. The "Expiration" column gives the date and the time that a key will expire. Keys expire in 6-hour increments. "Security ID" is the unique identification numbers for the key.Push Buttons - The following push buttons are available in the "Security Management" screen: "Change", "Add", "Delete", and "View Secure Date"."View Secure Date" will become active if a master RFID key or passcode was used to disarm MSS or if a master passcode has logged in.Adding Key Information
Illustration 2 g06075960
Add key information
The "Add" push button allows you to add a key to the list of Authorized Keys.Note: When a function requires a factory password, the "Enter Factory Passwords" box is displayed.To add a key, perform the following steps:Note: Adding Keys requires a key with the master access level or a factory password.
Insert a master key for that machine in the key start switch. Turn the key to the ON position. The MSS indicator should be green.Note: If a master key is not used, then a factory password is required.
Turn the key to the OFF position. The MSS indicator should remain green.
Insert the new key into the key start switch. This insertion must be done within 30 seconds of step 2. Turn the key to the ON position before the MSS indicator