SEAL-O-RING 3107259 - Caterpillar

Engine Monitoring
The Electronic Control Module (ECM) monitors the operating parameters of the engine. The ECM will generate an event code if a specific engine parameter exceeds an acceptable range that is defined by the engine monitoring system.Cross-Reference Information for Event Codes
Table 1 is a list of the event codes for the engine. The event codes are cross-referenced with the appropriate troubleshooting procedure that can be used to troubleshoot the code.Event codes are generated when abnormal operating conditions exist. A further explanation of event codes and the engine monitoring system are described after Table 1.
Table 1
Cross-Reference from Event Codes to Troubleshooting Procedure
J1939 Code and Description Troubleshooting Procedure
95-0 Engine Fuel Filter Differential Pressure : High - most severe (3) Troubleshooting, "Fuel Filter Is Restricted"
95-15 Engine Fuel Filter Differential Pressure : High - least severe (1)
95-16 Engine Fuel Filter Differential Pressure : High - moderate severity (2)
99-15 Engine Oil Filter Differential Pressure : High - least severe (1) Troubleshooting, "Oil Filter Differential Pressure Problem"
100-1 Engine Oil Pressure : Low - most severe (3) Troubleshooting, "Oil Pressure Is Low"
100-17 Engine Oil Pressure : Low - least severe (1)
101-0 Engine Crankcase Pressure : High - most severe (3) Troubleshooting, "Crankcase Pressure Is High"
101-15 Engine Crankcase Pressure : High - least severe (1)
101-16 Engine Crankcase Pressure : High - moderate severity (2)
105-0 Engine Intake Manifold #1 Temperature : High - most severe (3) Troubleshooting, "Intake Manifold Air Temperature Is High"
105-15 Engine Intake Manifold #1 Temperature : High - least severe (1)
105-16 Engine Intake Manifold #1 Temperature : High - moderate severity (2)
107-15 Engine Air Filter 1 Differential Pressure : High - least severe (1) Troubleshooting, "Inlet Air Is Restricted"
107-16 Engine Air Filter 1 Differential Pressure : High - moderate severity (2)
110-0 Engine Coolant Temperature : High - most severe (3) Troubleshooting, "Coolant Temperature Is High"
110-15 Engine Coolant Temperature : High - least severe (1)
110-16 Engine Coolant Temperature : High - moderate severity (2)
110-17 Engine Coolant Temperature : Low - least severe (1) Troubleshooting, "Coolant Temperature Is Low"
111-1 Engine Coolant Level : Low - most severe (3) Troubleshooting, "Coolant Level Is Low"
111-17 Engine Coolant Level : Low - least severe (1)
175-0 Engine Oil Temperature 1 : High - most severe (3) Troubleshooting, "Oil Temperature Is High"
175-15 Engine Oil Temperature 1 : High - least severe (1)
175-16 Engine Oil Temperature 1 : High - moderate severity (2)
190-0 Engine Speed : High - most severe (3) Troubleshooting, "Engine Overspeeds"
190-15 Engine Speed : High - least severe (1)
971-31 Engine Derate Switch The monitoring system override switch has been activated.
Engine derates will be prevented when this event is active.
1237-31 Engine Shutdown Override Switch The monitoring system override switch has been activated.
Engine shutdowns will be prevented when this event is active.
The following event(s) will not be overridden:
190 Engine Overspeed code(s)
1664-31 Engine Automatic Start Failed The number of crank cycles has exceeded the following programmable parameters:
"Starting System Maximum Number of Crank Cycles"
"Starting System #2 Maximum Number of Crank Cycles"
If a problem with the engine is suspected, refer to Troubleshooting, "Engine Cranks