SEAL 3263912 - Caterpillar

Illustration 66 g01264247
Remove bearing (70).
Illustration 67 g01264249
Remove bolts (71). Remove hub (72).
Illustration 68 g01264252
Remove race (73).
Illustration 69 g01264255
Remove O-ring seal (74) from hub (72).
Illustration 70 g01264259
Use two people to remove impeller (75). The weight of impeller (75) is approximately 28 kg (62 lb).
Illustration 71 g01264261
Use Tooling (A) and a suitable lifting device to remove flange (76). The weight of flange (76) is approximately 57 kg (125 lb).
Illustration 72 g01264264
Remove wear sleeve (77) from flange (76).
Illustration 73 g01264626
Use Tooling (A) and a suitable lifting device to turn over flange (76). The weight of flange (76) is approximately 57 kg (125 lb).
Illustration 74 g01264501
Remove bolts (78). Remove gear (79).
Illustration 75 g01264516
Remove bolts (82). Remove washers (81). Remove race (80).
Illustration 76 g01264663
Use Tooling (B) and a suitable lifting device to position stator carrier (83). The weight of stator carrier (83), the distributor, and the shaft assembly is approximately 68 kg (150 lb).
Illustration 77 g01264655
Remove bolts (84).
Illustration 78 g01264658
Use bolts (84) as pusher bolts to separate distributor (85) from stator carrier (83). Remove lip seal (86).
Remove distributor (85) and the gasket.
Illustration 79 g01264791
Use Tooling (B) to remove shaft assembly (87). The weight of shaft assembly (87) is approximately 34 kg (75 lb).
Illustration 80 g02141474
Use a suitable press to remove carrier (88), bearing (89), and carrier (90) from shaft (87). Remove seal rings (91).
Illustration 81 g02083673
Remove seal rings (92), retaining ring (93), and bearing (94) from stator carrier (83).