3367524 SEAL-O-RING Caterpillar parts
420E, 420F, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
Rating:
Alternative (cross code) number:
CA3367524
336-7524
3367524
CA3367524
336-7524
3367524
Weight: 0.01 pounds 0 kg.
BACKHOE LOADER,
Compatible equipment models: 3367524:
Number on catalog scheme:
4
For full view, you need register
Information:
Disconnect and remove shunt wire assembly (4) and motor terminal connector "MTR" (3) from the solenoid (1) and starting motor.
Illustration 2 g00820183
Illustration 3 g00810580
Remove the plug (5) and seal from the shift lever housing. Remove the nut (6) that is inside the shift lever housing. The nut holds the plunger to the shift lever.
Remove bolts (2) and solenoid (1) from the shift lever housing. Do not disassemble the solenoid. The parts inside the solenoid are not serviceable.
Illustration 4 g00810222
Illustration 5 g00810478
Mark the following components for correct assembly: rear housing (8), pinion drive, shift lever housing and starting motor housing. Remove four bolts (7) and rear housing (8). Remove washer (9) from the armature. Remove the O-ring seal from the starting motor housing, if necessary.
Illustration 6 g00810242
Remove bushing (10) from the rear housing, if necessary.
Illustration 7 g00810245
Lift each brush spring (12) and put the spring on the left side of the brush (14). Disconnect three leads (11) and remove brush holder (13) .
Remove brushes (14) from the brush holder.
Illustration 8 g00810249
Remove six bolts (16) and pinion drive housing (15) .
Illustration 9 g00810257
Remove bushing (17) from the pinion drive housing, if necessary.
Illustration 10 g00810266
Illustration 11 g00810429
Illustration 12 g00810272
Drive retainer (18) backward away from ring (20) that is below the retainer. Remove the ring and the retainer. Remove armature (19) from pinion drive (21) and the starting motor and the shift lever housing (23). Remove the washer (22) from the armature (19) .Note: The pinion drive that is on the 41-MT starting motor is not the same pinion drive that is shown. The pinion drive is similar to a 42-MT starting motor. Refer to Disassembly and Assembly, "Starting Motor - Disassemble".
Remove pinion drive (21) from the shift lever forks (25) .
Remove five bolts (26) and shift lever housing (23). Remove ring (24) with tool (A), pin (27) and shift lever (25). Remove the seals from the pin, if necessary.
Remove the O-ring seal from the shift lever housing, if necessary.
Illustration 13 g00810276
Remove seal (28) and bushing (29) from the shift lever housing, if necessary.
Illustration 14 g00810281
Remove eight screws (32), field winding coil (30), and pole shoes (31) from the starting motor housing. It may be necessary to use an impact driver to remove screws (32). One of the screws is the negative terminal.
Clean the armature, field winding coil, and pinion drive with mineral spirits and a brush.Note: If the commutator is dirty, the commutator may be cleaned with Number 00 sandpaper. Do not use emery cloth.
Inspect all parts for wear and damage.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
246D, 277D, 279D, 420F, 422E, 422F, 428E, 428F, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
12M 2, 24M, 2864C, 3126B, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406B, 3406C, 3406E, 3456, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, ...
428E, 432E, 432F, 442E, 444E, 444F, 924K, 938K
120H, 120K, 120K 2, 120M, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 2290, 2390, 2391, 2470C,...
246D, 272D, 272D XHP, 277D, 279D, 299D, 299D XHP, 416F, 420F, 422F, 428F, 430F, 432F
416F, 420F, 422F, 428F, 430F, 432F
246D, 272D, 272D XHP, 277D, 279D, 299D, 299D XHP, 416F, 420F, 422F, 428F, 430F, 432F
30/30, 3116, 3126, 420F, 430F, 432F, 444F, 450F, 770, 770G, 770G OEM, 772, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775F, 775G, 775G LRC, 775G OEM, 777F, 777G, 793D, 793F, 793F AC, 793F CMD, 79...
16H NA, 303.5D, 303.5E, 303E CR, 304D CR, 304E, 305.5D, 305.5E, 305D CR, 305E, 336E, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406B, 3406C, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3508, 3508B,...
322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 345C, 430E, 430F, 442E, 444E, 568 FM LL, 613C, 613C II, 621G, 950K, 962K, 966G, 966K, 966M, ...
430E
430E, D7H, D7R II, D7R XR, D8L
430E, 824H, 826H
2074260
SEAL-O-RING
416E, 416F, 420E, 420F, 422E, 422F
416E, 416F, 420E, 420F, 422E, 422F
3367529
SEAL-O-RING
420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
2534976
SEAL
434E, 434F, 444E, 444F
434E, 434F, 444E, 444F
120M 2, 2384C, 2484C, 2570C, 2670C, 312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 416F, 420F, 428F, 4...
420F, 422E, 424B, 428E, 428F, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, M312, M315, M318
432E, 434E, 442E, 444E, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20
2577718
SEAL AS
432E, 434E, 442E, 444E
432E, 434E, 442E, 444E
7G9108
SEAL-O-RING
432E, 434E
432E, 434E