SEAL 3447219 - Caterpillar

Illustration 17 g01513442
From the Payload submenu, press the Left/Up button or press the Down/Right button until the "Target Weight" is highlighted.
Illustration 18 g01513444
Press the "OK" button.Note: The default weight is displayed or the target weight that was previously entered is displayed. Entering a new number at this point will cause the existing number to be replaced.The operator wishes to enter 190 metric tons in the example that is provided below.
Press the "OK" button in order to enter a new value.
Illustration 19 g01513446
Press the Left/Up button or press the Down/Right button in order to scroll through numeric values. The operator may also select a decimal point in order to enter values less than a metric ton.
Press the "OK" button in order to select a number. In this example, the value "1" is entered.
Press the Back button in order to move to a number that was previously entered. Move to a number that was previously entered in order to make corrections.
Illustration 20 g01513449
Press the Left/Up button or press the Down/Right in order to highlight the value "9".
Press the "OK" button.
Illustration 21 g01513451
Press the Left/Up button or press the Down/Right button in order to highlight the value "9".
Press the "OK" button.
Press the highlighted "Save" value in order to accept the target weight.Selecting An Item From a List
The display will show a list of items. Multiple items are display at a time, but only one item may be highlighted at one particular time. The Operator selects an item from a list with the Left/Up button or the Down/Right button in order to move the highlighted cursor. Press the "OK" button in order to select a highlighted item.In the example that follows, the operator has been loading overburden. The operator will now be loading gravel. In order for the operator to select a new material, the operator must navigate to the Payload submenu.
Illustration 22 g01513493
From the Payload submenu, press the Left/Up button or press the Down/Right button until the "Site Information" is highlighted.
Press the "OK" button.
Illustration 23 g01513645
From the Payload submenu, press the Left/Up button or press the Down/Right button until the "Material Type" is highlighted.
Press the "OK" button.
Illustration 24 g01513648
Press the Left/Up button or press the Down/Right button in order to highlight the desired material. In this example, the desired material is gravel.
Illustration 25 g01513650
Press the "OK" button in order to select the desired material.
Illustration 26 g01513651
Note: The above screen will confirm the material that was just selected by the operator.
Press the Back button in order to return to the previous menu. Press the "OK" button in order to return to the list of materials.Storage of Data
Payload Store buttons
Illustration 27 g01513897
(12) Store button on the Implement PodThe Store buttons are used by the operator to enter information into the memory of the loader payload system. Pressing one of the Store buttons tells the VIMS loader payload system that a truck has been loaded and the payload data for the loaded truck is stored in onboard memory. The location of the two Store buttons follows: (2) - The second button from the top of