3476530 SEAL-RECTANGULAR Caterpillar parts
330D, 330D FM, 330D L, 330D MH, 336D, 336D2, 336D2 L, 336E, 336E L, 345C, 345C L, 345C MH, 345D, 345D L, 349D, 349D L, 349E, 349E L, 349F L, W345C MH
Rating:
Alternative (cross code) number:
CA3476530
347-6530
3476530
CA3476530
347-6530
3476530
Weight: 0.01 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 3476530:
Number on catalog scheme:
49
For full view, you need register
Information:
Illustration 4 g06118296Included in the 376-4554 Lifting Pin Group are 4 pins and 4 shackles.Shackles are chosen for a load rating of 35 ton on the lifting pins.Note: Use only the shackles that are provided with the lifting pins.376-4556 Lifting Pins
Illustration 5 g06118271The 376-4556 Lifting Pins are used on 769, 770, 771, 772, 773, 775, and 777 machines.
Table 2
376-4556 Truck Body Pin
Working load limit 7 Ton (14,000 lb)
Weight (individual) 21.61 kg (47.64 lb)
Weight (group) 86.44 kg (190.5 lb)
Dimensions (L x OD) 314.9 x 101.6 mm (12.39 x 4 inch)
Illustration 6 g06118296Included in the 376-4556 Lifting Pin Group are 4 pins and 4 shackles.Shackles are chosen for a load rating of 18 ton on the lifting pins.Note: Use only the shackles provided with the lifting pins.Operation Section
Setup
Illustration 7 g02720617
Truck Body with Shackles on Inside of the Truck Body
Caterpillar Inc. recommends that both the long pins and the short pins be installed with the shackles on the inside of the truck body.Refer to the individual truck body manual for proper procedures on removing and installing truck bodies.
Table 3
Current Model Truck Body Manuals
Media No. Media Name
REHS1659 769D Off-Highway Truck and 771D Quarry Truck Assembly Procedure
REHS1835 770 Off-Highway Truck and 772 Off-Highway Truck Assembly Procedure
REHS2704 773F Off-Highway Truck and 775F Off-Highway Truck Assembly Procedure
REHS2594 Assembly Procedures for 777F Off-Highway Trucks
REHS4422 Assembly Procedure for the 785D Off-Highway Truck
REHS0878 789C Off-Highway Truck Assembly Procedure
REHS2210 Assembly Procedure for the 793D Off-Highway Truck
REHS4417 Assembly Procedure for the 795F AC Off-Highway Truck
REHS5063 Assembly Procedure for the 797F Off-Highway Truck Maintenance
Inspection
Use a straight edge before and after each use to determine if the lifting pin is bent.
Illustration 8 g02720636Do not use if lifting pin is bent, cracked, or if hole is elongated.
Illustration 9 g02720640Do not use if Working Load Limit (WLL) markings are not legible.Cleaning
Clean the tooling using a non-solvent based cleaner.Storage
Store the tooling indoors in a clean, dry location to prevent rust or corrosion.Store the lifting pins with the shackle installed, to keep the tools stable, and reduce the possibility of rolling. Storing the pins with the shackle installed also ensures that the tools will remain a group.Tool Disposal
At the end of the operational life of the tool, destroy the tool, dispose of as scrap, and replace with new tool.
Table 4
Service Replacement Pins
Short pin part number 376-4555
Long pin part number 376-4553 Replacement shackles can be purchased from The Crosby Group.
Table 5
Tonnage Crosby Part Number
35 Ton Shackle 1018650-G209
18 Ton Shackle 1017626-G209A Contact Information
For additional product support questions concerning this tool, contact Dealer Service Tools Hotline at:USA: 1-800-542-8665, Option 1International: 1-309-578-7372To contact The Crosby Group for replacement shackles, visit The Crosby Group website at http://www.thecrosbygroup.com.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
328D LCR, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C MH, 345D L, 349D L, 349E, 349E ...
330C, 330D L, 330D MH, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L
345B II, 345C, 345C L, 365B, 365B II, 365C, 365C L, 365C L MH, 374D L, 374F L
345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B II, 365C, 365C L, 374D L, 374F L, 385B, 385C, 385C L, 390D, 390D L, 390F L
328D LCR, 345B II, 345B L, 345C, 345C L, 345D L, 349E L, 349E L VG, 349F L, 350, 365B, 365B II, 365B L, E650
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
325C, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345C, 345D, 345D L, 349D, 349D L
345B II, 345C, 345D, 345D L, 349D, 349D L
345B II, 345C, 345D, 345D L, 349D, 349D L
330B, 330B L, 330C L, 330D, 330D L, 336D
3476531
SEAL-RECTANGULAR
330D, 330D FM, 330D L, 330D MH, 345C, 345C L, 345C MH, W345C MH
330D, 330D FM, 330D L, 330D MH, 345C, 345C L, 345C MH, W345C MH
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 374D L
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L
345C, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 385B, 385C, 385C L, 390D, 390D L
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
345B II, 345C, 345C L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L VG, 349F L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C, 385C L MH
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2941690
SEAL
320D, 320D FM, 321D LCR, 323D L, 323D LN
320D, 320D FM, 321D LCR, 323D L, 323D LN
324D L, 325D L, 330D L, 336D L
325C, 330C, 330C L, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 390D, 390D L, W345B II, W345C MH
2426917
SEAL-LIP TYPE
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, W345C MH
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, W345C MH
345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, W345C MH