3611128 SEAL Caterpillar parts
303.5D, 303.5E, 303E CR, 304D CR, 304E, 305.5D, 305.5E, 305D CR, 305E, 307D, 308D, 308E2 CR, 416E, 416F, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
Rating:
Alternative (cross code) number:
CA3611128
361-1128
3611128
CA3611128
361-1128
3611128
Weight: 0.26 pounds 0 kg.
BACKHOE LOADER, MINI HYD EXCAVATOR,
Compatible equipment models: 3611128:
Number on catalog scheme:
2
For full view, you need register
Information:
C32 Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-7257 Cradle As 3
B 9U-7240 Camshaft Hook 2 Start By:
Remove the rocker arms and the rocker shafts.
Remove the valve cover base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the rear gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Care must be used when removing or installing the camshaft. Do not damage the finished surfaces of the camshaft or the camshaft bearings.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 9 g03427215
Remove bolts (1) and pump drive (2).
Illustration 10 g03427216
Line up timing marks on gear (4) for reassembly purposes.
Remove bolts (3). Remove gear (4) from the flywheel housing.
Illustration 11 g03427220
Remove bolts (5), thrust plate (6), and adapter assembly (7).
Illustration 12 g03427221
Use bolt (5) in order to remove sealing plate (8). Remove the O-ring seals.
Illustration 13 g03427223
Remove elbow (10) and cover (9).
Illustration 14 g03427226
Remove bolts (11) and damper (12).
Illustration 15 g03427227
Remove bolts (13). Remove sealing plate (14), adapter assembly (15), and the O-ring seals.
Illustration 16 g03588176
Illustration 17 g03588178
Install Tooling (A) on the cylinder head at three locations.
Carefully slide camshaft (16) out of the cylinder head for removal. Use Tooling (B) and two technicians to remove the camshaft. Keep the camshaft level while the camshaft is being removed from the cylinder head. The weight of the camshaft is approximately 35 kg (77 lb).
Table 2
Required Tools
Tool Part Number Part Description Qty
A 9U-7257 Cradle As 3
B 9U-7240 Camshaft Hook 2 Start By:
Remove the rocker arms and the rocker shafts.
Remove the valve cover base.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the rear gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Care must be used when removing or installing the camshaft. Do not damage the finished surfaces of the camshaft or the camshaft bearings.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 9 g03427215
Remove bolts (1) and pump drive (2).
Illustration 10 g03427216
Line up timing marks on gear (4) for reassembly purposes.
Remove bolts (3). Remove gear (4) from the flywheel housing.
Illustration 11 g03427220
Remove bolts (5), thrust plate (6), and adapter assembly (7).
Illustration 12 g03427221
Use bolt (5) in order to remove sealing plate (8). Remove the O-ring seals.
Illustration 13 g03427223
Remove elbow (10) and cover (9).
Illustration 14 g03427226
Remove bolts (11) and damper (12).
Illustration 15 g03427227
Remove bolts (13). Remove sealing plate (14), adapter assembly (15), and the O-ring seals.
Illustration 16 g03588176
Illustration 17 g03588178
Install Tooling (A) on the cylinder head at three locations.
Carefully slide camshaft (16) out of the cylinder head for removal. Use Tooling (B) and two technicians to remove the camshaft. Keep the camshaft level while the camshaft is being removed from the cylinder head. The weight of the camshaft is approximately 35 kg (77 lb).
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
303.5C, 303.5D, 303.5E, 303C CR, 304C CR, 304D CR, 304E, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307C, 307D, 307E, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312D, 312D L,...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
302.5C, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304D CR, 304E, 312C, 312C L, 315C, 318C, 319C, 319D, 319D L, 319D LN, 320 L, 320C, 320C FM, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 L, ...
303.5D, 303.5E, 304C CR, 304D CR, 304E, 305.5D, 305C CR, 305D CR, 307D, 307E, 308E, 308E2 CR, 311B, 311D LRR, 311F LRR, 312B, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 L...
2384C, 2484C, 304, 304C CR, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 330, 330 FM L, 330 L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 350, 365B, 375, 375 L, 5080, 559C, 579C, AD30, AD45B, AD55, ...
303.5E, 303E CR, 304E, 305, 305.5E, 305E, 307D, 308D, 308E CR, 308E SR, 320C, 330C L, 330D L, 345B II, 345C, E200B, E240, E240C, E300, E300B, E650, E70B, EL240B, H110E S
115, 304C CR, 305D CR, 305E, 345C, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385B, 385C, 385C L, 390D, 390D L, 390F L, 5080, AD45B, CR20, E140, E650, H140...
304C CR, 305.5D, 305.5E, 305C CR, 305D CR, 305E
305.5D, 305.5E, 305C CR
307D, 308D, 365B, 365B II, 365B L, 901C, 902C, 903C
308D, 311, 375, 375 L, 5080, 583T, 587R, 587T, 611, 613C, 613C II, 615, 615C, 621E, 621F, 623E, 623F, 627E, 627F, 631E, 633E II, 637E, 639D, 651E, 657E, 931C, 933, 933C, 939, 939C, 943, 953, D10N, D3C...
308E, 308E CR, 308E SR, 308E2 CR
246D, 277D, 279D, 420F, 422E, 422F, 428E, 428F, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 434E, 434F, 924K
422E, 422F, 428E, 428F, 434E, 434F, 924K
422E, 422F, 428E, 428F, 434E, 434F, 924K
422E, 422F, 428E, 428F, 434E, 434F, 924K
416F, 420F, 422E, 422F, 428E, 428F, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
3081875
SEAL-O-RING
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-22, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
216B, 216B3, 226B, 226B3, 232B, 242B, 247B, 247B3, 257B, AP-255E, BB-621C, C1.1, C1.5, C2.2, CB-22, CB-34, CB22B, CB24B, CB32B, CB34B, CB34B XW, CC24B, CC34B
12M 2, 24M, 2864C, 3126B, 312D2, 312D2 GC, 312D2 L, 313D2, 313D2 LGP, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 3406B, 3406C, 3406E, 3456, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, ...
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 924K, 930K
2147654
SEAL-O-RING
303.5D, 303.5E, 303E CR, 304D CR, 304E, 305.5D, 305.5E, 3054, 3056, 305D CR, 305E, 307D, 308D, 308E2 CR, 416E, 416F, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F,...
303.5D, 303.5E, 303E CR, 304D CR, 304E, 305.5D, 305.5E, 3054, 3056, 305D CR, 305E, 307D, 308D, 308E2 CR, 416E, 416F, 420E, 420F, 422E, 428E, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F,...