3640087 SEAL-U-CUP Caterpillar parts
950H
Rating:
Alternative (cross code) number:
CA3640087
364-0087
3640087
CA3640087
364-0087
3640087
Weight: 0.03 pounds 0 kg.
WHEEL LOADER,
Compatible equipment models: 3640087:
Number on catalog scheme:
11
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 1 g00609523
Typical Example
Note: Release the tension on the belt at the belt tightener, if the engine is not equipped with a belt tensioner.
Use Tooling (A) to release the tension on belt tensioner (5).
Remove drive belt (4) from the drive pulley on alternator (3).
Place an index mark on the wires of harness assembly (1) that are connected to the alternator. Disconnect harness assembly (1) from the alternator.
Remove bolts (2).
Remove alternator (3) from the mounting bracket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 2 g00609523
Typical example
Position alternator (3) on the mounting bracket. Install bolts (2).
Use Tooling (A) to install drive belt (4) on the drive pulley of the alternator. Note: Adjust the tension on the drive belt if the engine is not equipped with a belt tensioner. Refer to the Operation and Maintenance Manual for the correct adjusting procedure.
Connect harness assembly (1) to the alternator. Use the index marks to correctly connect the harness assembly. Tighten the mounting bolt for the ground wire to a torque of 6.2 0.6 N m (54 5 lb in). Tighten the mounting bolt for the battery wire to a torque of 11.3 2.3 N m (100 20 lb in).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 1 g00609523
Typical Example
Note: Release the tension on the belt at the belt tightener, if the engine is not equipped with a belt tensioner.
Use Tooling (A) to release the tension on belt tensioner (5).
Remove drive belt (4) from the drive pulley on alternator (3).
Place an index mark on the wires of harness assembly (1) that are connected to the alternator. Disconnect harness assembly (1) from the alternator.
Remove bolts (2).
Remove alternator (3) from the mounting bracket. Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 168-0383 Circuit Breaker Bar 1
Illustration 2 g00609523
Typical example
Position alternator (3) on the mounting bracket. Install bolts (2).
Use Tooling (A) to install drive belt (4) on the drive pulley of the alternator. Note: Adjust the tension on the drive belt if the engine is not equipped with a belt tensioner. Refer to the Operation and Maintenance Manual for the correct adjusting procedure.
Connect harness assembly (1) to the alternator. Use the index marks to correctly connect the harness assembly. Tighten the mounting bolt for the ground wire to a torque of 6.2 0.6 N m (54 5 lb in). Tighten the mounting bolt for the battery wire to a torque of 11.3 2.3 N m (100 20 lb in).
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
928HZ, 938G, 938G II, 938H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G II, 966H, 972G II, 972H, IT28G
120K, 120K 2, 120M, 12K, 12M, 12M 3, 12M 3 AWD, 140K, 140K 2, 140M, 140M 3, 140M 3 AWD, 160K, 160M, 160M 3, 160M 3 AWD, 938G II, 938H, 950G II, 950H, 950K, 962H, 962K, HA770, HA870, HA871, IT38G II, I...
621H, 621K, 627H, 627K, 627K LRC, 950H, 950K, 962H, 962K, 966K, 972K, IT62H
844, 844H, 844K, 950H, 962H, 966G, 966H, 966K, 966M, 966M XE, 972G, 990, 990 II, 990H, 990K, 992G, IT62H, R1300G, R1300G II
950H, 962H, IT62H
938H, 950H, 950K, 962H, 962K, 966H, 966K, 972H, 972K, IT38H, IT62H
938H, 950H, 950K, 962H, 962K, 966H, 966K, 972H, 972K, IT38H, IT62H
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, ...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 3...
320 L, 320B, 320B FM LL, 320B L, 320B U, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 320N, 321B, 322, 322 FM L, 322 LN, 322B, 322B L, 322B LN, 323E L, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 32...
5130, 5130B, 824G II, 824H, 950H, 962H, 966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, D10N, D10R, D10T, MH3037, MH3059
5130, 5130B, 950H, 980C, 980F, 980F II, R1600, R1600G, R1600H
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C FM, 330C L, 3...
1090, 1190, 1190T, 120H, 120H ES, 120H NA, 120K, 120K 2, 1290T, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 1390, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 16...
545, 545C, 966H, 966K, 966M, 972H, 972K, 972M
950G II, D9R, D9T
1672571
SEAL-WIPER
950G II
950G II
1672356
SEAL-U-CUP
994F, 994H
994F, 994H
1672240
SEAL AS-BUFFER
5230, 5230B, 994F, 994H
5230, 5230B, 994F, 994H
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 990K, 993K, 994F, 994H
2493140
SEAL
994F, 994H
994F, 994H
2415790
SEAL-O-RING
834K, 844H, 988K, 990H, D10N, D10R, D10T, D11R, D11T, D9T
834K, 844H, 988K, 990H, D10N, D10R, D10T, D11R, D11T, D9T
773F, 775F, 844H, 990H, AD55B, AD60