SEAL-O-RING 3824825 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3931 Anti-Seize Compound -
B 1U-6396 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01116799
Attach a suitable lifting device to turbocharger (8). The weight of turbocharger (8) is approximately 40 kg (88 lb).
Install new gasket (6) between exhaust manifold (5) and turbocharger (8). Position turbocharger (8) on the exhaust manifold. Apply Tooling (A) to the threads of bolts (4). Install bolts (4) and tighten to a torque of 54 5 N m (40 lb ft).
Position clamp (7) over elbow coupling (9) and the turbocharger. Tighten the nut on the clamp to a torque of 14 1 N m (124 9 lb in). Lightly tap around the diameter of the clamp with a soft hammer. Tighten the nut to a torque of 14 1 N m (124 9 lb in).
Install the O-ring seals on air pipes (3). Lubricate the O-ring seals with Tooling (B). Install air pipes (3).
Illustration 2 g01116759
Install the water hose assemblies, if necessary.
Install tube assembly (2) and tube assembly (1).
Install the air cleaner.