SEAL GP-CRANKSHAFT 3831775 - Caterpillar

Illustration 1 g02264874
DASA 4 System Configuration in the Cab (1) Connection module (BU) (11) Presentation and programming unit (dxPC) (12) Keypad module (KU) (14) Printer (15) Joysticks (110) Output module (D4O8D) (113) High flow (Pump 2) (114) Low flow (Pump 1) (117) Auxiliary 1 (118) Auxiliary 2 (A) Harness connector Keypad module (KU) (12) adapts signals from two joysticks (15) .Connection module (BU) (1) connects the presentation and programming unit (dxPC) (11) and joysticks (15) .Output module (D4O8D) (110) controls the outputs for various functions on the machine.
Illustration 2 g02265133
DASA 4 System Configuration on the Harvester Head (54) Lower knife close (58) Chain tightener (55) Lower knife open (51) Accumulator valve (32) Diameter right (34) Length pulses right (38) Saw bar position (35) Saw home (33) Length pulses left (31) Diameter left (A) Harness connector (50) Output module (D4O8D) (30) Input module (D4I8) (70) Output module (D4O8D) (20) Calculation and connection module (CU) (60) Output module (D4O8A) (71) Delimbing knives close (73) Bail float (75) Feed roller open (77) Bail up (78) Bail down (76) Feed roller close (74) Butt saw bar out (72) Delimbing knives open (61) Feed forward (63) Butt saw motor (67) Pressure (Lower arms) (68) Pressure (Feed roller) (66) Pressure (Delimbing knives) (62) Feed reverseInput module (D4I8) (30) receives inputs from the sensors on the harvester head.Output module (D4O8A) (60) and output module (D4O8D) (50, 70) control the outputs for various functions of the harvester head.Calculation and connection module (CU) (20) contains a signal processor and the software that controls the DASA 4 system.