SEAL 3B9378 - Caterpillar

Settings
If the display is not at the home screen, navigate to the home screen where the "Settings" display soft button is available. Press the "Settings" soft button to access the menu of items that is available for "Settings".The following screens are available under the "Settings" heading:
Display settings
Software information
Timing control
Gaseous fuel parameters
Air-fuel ratio control
Speed control
Governor gain parameters
Engine state control
Engine publications
ECM PMS Page 1
ECM PMS Page 2
ECM PMS Page 3
ECM PMS Page 4
ISM PMSDisplay Settings
Illustration 1 g06085368
(1) Display settings screen
(2) Display settings button
(3) Settings soft buttonAccess "Display Settings" by pressing the "Settings" soft button (3), then press the "Display Settings" button (2). Refer to Illustration 1. The "Display Settings" has two touch and slide screen displays and 5 soft buttons that will display:
Units (English to Metric)
Brightness
Display IP configuration
DIM IP settings
Set time and date
SYNC
Technician loginSoftware Information
Illustration 2 g03839533
(3) Settings soft button
(4) Software information soft button
(5) Software information displayAccess "Software Information" by pressing the "Settings" soft button (3), then press the "Software Information" soft button (4). Refer to Illustration 2. The software information is divided into three categories:
Engine information
D.I.M.
Display informationThe following lists the information available for each category.Engine Information
Engine serial number
Electronic control module (ECM) serial number
Software group part number
Software group release date
Software group descriptionD.I.M. Information
ECM part number
ECM serial number
Software group part number
Software group release date
Software group descriptionDisplay Information
Software group part number
Software group release date
Software group descriptionTiming Control
Illustration 3 g06085371
(3) Settings button
(6) Timing control button
(7) Timing control displayAccess "Timing Control" by pressing the "Settings" button (3), then press the "Timing Control" button (6). Refer to Illustration 3. The timing control display (7) contains one digital readout:
First desired timing (in degrees)Gaseous Fuel Parameters
Illustration 4 g03839749
(3) Settings soft button
(8) Fuel parameters soft button
(9) Fuel parameters displayAccess "Gaseous Fuel Parameters" by pressing the "Settings" soft button (3), then press the "Gaseous Fuel Parameters" soft button (8). Refer to Illustration 4. The fuel parameters display shows the following:
Fuel quality (Btu)
Fuel quality input type configuration
Fuel specific heat ratio
Gas specific gravityAir Fuel Ratio Control
Illustration 5 g03839756
(3) Settings soft button
(10) Fuel Parameters soft button
(11) Fuel Parameters displayAccess "Air Fuel Ratio Control" by pressing the "Settings" soft button (3), then press the "Air Fuel Ratio Control" soft button (10). Refer to Illustration 5. The air fuel ratio control display (11) shows the following:
Maximum choke position (%)
Emission feedback mode configuration
Engine start choke position (%)Speed Control
Illustration 6 g06098562
(3) Settings soft button
(12) Speed control soft button
(13) Speed control displayAccess "Speed Control" by pressing the "Settings" soft button (3), then press the "Speed Control" soft button (12). Refer to Illustration 6. The speed control display shows the following:
Low idle speed (rpm)
Desired speed input configuration
Secondary desired speed input configuration
Engine acceleration rate (rpm)
Maximum engine high idle speed (rpm)
Minimum engine high idle speed (rpm)Governor Gain Parameter
Illustration 7 g03839762
(3) Settings soft button
(14) Governor gain parameter soft button
(15) Governor gain parameter displayAccess "Governor Gain Parameter" by pressing the "Settings" soft button (3), then press the "Governor Gain Parameter" soft button (14). Refer to Illustration 7. The governor gain display shows the following:
Governor (proportional) gain percentage (%)
Governor (integral) stability percentage