3C8567 SEAL Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8567
3C-8567
3C8567
CA3C8567
3C-8567
3C8567
Weight: 0.28 pounds 0 kg.
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1864 Retaining Ring Pliers As 1
B 1P-1861 Retaining Ring Pliers 1 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01197025
Use Tooling (B) in order to install retaining ring (7). Lower the temperature of bearings (6) and (10). Install bearing (10) and washer (9). Install bearing (6).
Illustration 2 g01197024
Install pin (5). Use Tooling (A) in order to install retaining ring (2) onto pin (5). Install gear assembly (1). Use Tooling (A) in order to install retaining ring (3).
Install pin (4).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1864 Retaining Ring Pliers As 1
B 1P-1861 Retaining Ring Pliers 1 Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01197025
Use Tooling (B) in order to install retaining ring (7). Lower the temperature of bearings (6) and (10). Install bearing (10) and washer (9). Install bearing (6).
Illustration 2 g01197024
Install pin (5). Use Tooling (A) in order to install retaining ring (2) onto pin (5). Install gear assembly (1). Use Tooling (A) in order to install retaining ring (3).
Install pin (4).