3D0360 SEAL Caterpillar parts
16
Rating:
Alternative (cross code) number:
CA3D0360
3D-0360
3D0360
CA3D0360
3D-0360
3D0360
MOTOR GRADER,
Compatible equipment models: 3D0360:
Number on catalog scheme:
None
For full view, you need register
Information:
Engine Removal And Installation
Refer to SERVICE GUIDE for Preliminary Information.
Always install lift arm support bracket when working under raised lift arms or bucket.
LIFT ARM SUPPORT BRACKET LOCATIONLift arm support bracket is stored behind sheet metal cover under fuel tank.
LIFT ARM SUPPORT BRACKET INSTALLEDRemoval
Remove radiator guard and radiator. See the covering topic.
FLEXIBLE DRIVE FLANGE BOLTS
1-Flexible drive coupling-to-torque converter drive flange bolts. Remove bolts, (eight). At installation, refer to the topic, FLEXIBLE DRIVE COUPLING in the POWER TRAIN DISASSEMBLY AND ASSEMBLY
PREPARING TO REMOVE ENGINE (Right Side)
2-Wiring. Remove cover and disconnect wires. 3-Glow plug wire. 4-Oil pressure indicator line. 5-Governor linkage. 6-Battery cable. 7-Ground cable. 8-Fuel line. Disconnect at fuel transfer pump. 9-Engine mounting bolts. Front and rear, remove.
PREPARING TO REMOVE ENGINE (Left Side)
10-Air cleaner indicator line. 11-Water temperature indicator bulb and tube. Disconnect at engine, loosely coil tube and tie to loader frame. 12-Hydraulic pump oil lines. Drain hydraulic system. 13-Torque converter oil cooler lines. 14-Engine mounting bolts, front and rear.
REMOVING THE ENGINEAttach a hoist to lifting eyes and remove the engine. Approximate weight 2000 lbs. (910 mkg). Tag shims at each mounting location for identification at engine installation.Installation
Position the diesel engine between the main frames and work it back and down into position in the frame. Install the same shims under the mounting flanges or the amount of shims as stamped on top of the main frame at each of the four mounting locations. Dowels in addition to the bolts should be installed to hold the engine in the proper location if the holes for the mounting bolts are enlarged.Install all oil and fuel lines, gauges, rods and other parts which were removed or disconnected.
Refer to SERVICE GUIDE for Preliminary Information.
Always install lift arm support bracket when working under raised lift arms or bucket.
LIFT ARM SUPPORT BRACKET LOCATIONLift arm support bracket is stored behind sheet metal cover under fuel tank.
LIFT ARM SUPPORT BRACKET INSTALLEDRemoval
Remove radiator guard and radiator. See the covering topic.
FLEXIBLE DRIVE FLANGE BOLTS
1-Flexible drive coupling-to-torque converter drive flange bolts. Remove bolts, (eight). At installation, refer to the topic, FLEXIBLE DRIVE COUPLING in the POWER TRAIN DISASSEMBLY AND ASSEMBLY
PREPARING TO REMOVE ENGINE (Right Side)
2-Wiring. Remove cover and disconnect wires. 3-Glow plug wire. 4-Oil pressure indicator line. 5-Governor linkage. 6-Battery cable. 7-Ground cable. 8-Fuel line. Disconnect at fuel transfer pump. 9-Engine mounting bolts. Front and rear, remove.
PREPARING TO REMOVE ENGINE (Left Side)
10-Air cleaner indicator line. 11-Water temperature indicator bulb and tube. Disconnect at engine, loosely coil tube and tie to loader frame. 12-Hydraulic pump oil lines. Drain hydraulic system. 13-Torque converter oil cooler lines. 14-Engine mounting bolts, front and rear.
REMOVING THE ENGINEAttach a hoist to lifting eyes and remove the engine. Approximate weight 2000 lbs. (910 mkg). Tag shims at each mounting location for identification at engine installation.Installation
Position the diesel engine between the main frames and work it back and down into position in the frame. Install the same shims under the mounting flanges or the amount of shims as stamped on top of the main frame at each of the four mounting locations. Dowels in addition to the bolts should be installed to hold the engine in the proper location if the holes for the mounting bolts are enlarged.Install all oil and fuel lines, gauges, rods and other parts which were removed or disconnected.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, ...
12E, 140G, 143H, 14E, 14G, 16, 160H, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 16H NA, 235, 235B, 235C, 245, 24H, 3208, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 3406, 3406B, 3406C, 3408, ...
1090, 1140, 1145, 1150, 1160, 1190, 1190T, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 1290T, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 1390,...
10, 120B, 120H, 120H ES, 120H NA, 12E, 12G, 12H ES, 12H NA, 130G, 135H, 135H NA, 140, 140B, 140G, 140H ES, 140H NA, 143H, 14E, 14G, 14H NA, 153, 16, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 183B,...
10 FT, 10-20B, 1090, 1190, 1190T, 120G, 128, 129, 12E, 12F, 12G, 130G, 1390, 140G, 14E, 14G, 14H, 14H NA, 153, 16, 160G, 163, 16G, 16H, 16H NA, 172, 173B, 183, 183B, 184, 191, 215, 225, 225D, 227, 229...
120G, 12G, 130G, 140G, 14G, 14H, 14H NA, 16, 160G, 215, 215B, 225, 225D, 231D, 235, 235C, 235D, 245, 245B, 245D, 24M, 3408, 350, 365B, 365B II, 365B L, 375, 375 L, 385B, 46, 5080, 5090B, 5110B, 5130, ...
16, 3208, 3306, 3406, 3406B, 651, 657, D333A, D333B, D342, D342C
16, 1676, 16G, 245, 245B, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3412, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 375, 533, 543, 561D, 572R, 572R II, 578, 583R, 583T, 587R, 587T, 621...
16, 508, 517, 583H, 815, D337F, D342, D342C, D343, D353C, D379, D379A, D379B, D398, D398A, D399, D4HTSK II, D4HTSK III, D8H, D9E, D9G, G342C, G379, G398, G399
12F, 14E, 16, 518, 615, 615C, 623B, 623E, 623F, 623G, 623H, 623K, 623K LRC, 931B, 950, D320A, SH-56B
140, 141, 153, 16, 173B, 191, 518, 528, 613, 613B, 621, 650B, 666, 824S, 920, 941, 951B, 992, D4E, D7G, G398
16, 508, 931B, 941, 955H, D3, D3B, D4D
12E
3D4975
SEAL
12E
12E
5D2795
SEAL
16
16
2D4558
SEAL
12E
12E
2Y2719
SEAL SHAFT
120B
120B
2Y2718
SEAL SPACER
120B
120B
6D1531
SEAL
16
16
6D1532
SEAL
16
16
6D1475
SEAL
16
16
1S6692
SEAL
16
16