3E6648 SEAL (81cm) Caterpillar parts
307, 307B, 315, 325, 325 LN, 330, 330 FM L, 330 L
Rating:
Alternative (cross code) number:
CA3E6648
3E-6648
3E6648
CA3E6648
3E-6648
3E6648
Weight: 0.01 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$6.94
28 Nov 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR CM SEAL 3E6648 NEW
$7.55
07 Jan 2019
11 Hundredths Pounds
CTP: CTP
Caterpillar CM SEAL (3E6648)
3E6648 Weight(lbs): 0.10 Length(cm): 1.0000 Width(cm): 3.0000 Depth(cm): 1.5000
3E6648 Weight(lbs): 0.10 Length(cm): 1.0000 Width(cm): 3.0000 Depth(cm): 1.5000
Number on catalog scheme:
4
For full view, you need register
Compatible equipment models: 3E6648:
Information:
Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the engine is equipped with fan guards, remove the fan guards.
Illustration 1 g01325726
Typical example
Loosen bolts (1), (2), and (4).
Push alternator (3) toward the engine and remove V-belt (5).Note: Mark the direction of rotation if the V-belt will be reused.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01325726
Typical example
Check the condition of the V-belt. If the V-belt is worn or damaged, use a new V-belt for replacement.
Install V-belt (5) in position on the engine.Note: A used V-belt should be installed in the original direction of rotation.
Slide alternator (3) away from the engine. Refer to Operation and Maintenance Manual for information on the correct belt tension. Tighten bolts (1), (2), and (4) to a torque of 25 N m (221 lb in).
If the engine is equipped with fan guards, install the fan guards.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If the engine is equipped with fan guards, remove the fan guards.
Illustration 1 g01325726
Typical example
Loosen bolts (1), (2), and (4).
Push alternator (3) toward the engine and remove V-belt (5).Note: Mark the direction of rotation if the V-belt will be reused.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01325726
Typical example
Check the condition of the V-belt. If the V-belt is worn or damaged, use a new V-belt for replacement.
Install V-belt (5) in position on the engine.Note: A used V-belt should be installed in the original direction of rotation.
Slide alternator (3) away from the engine. Refer to Operation and Maintenance Manual for information on the correct belt tension. Tighten bolts (1), (2), and (4) to a torque of 25 N m (221 lb in).
If the engine is equipped with fan guards, install the fan guards.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
5I3679
SEAL AS
311, 315, 320 L, 325, 325 L, 325 LN, 330, 330 FM L
311, 315, 320 L, 325, 325 L, 325 LN, 330, 330 FM L
1027336
SEAL
307, E70B
307, E70B
0949362
SEAL
307, E110, E120, E140, E450, E70, E70B
307, E110, E120, E140, E450, E70, E70B
5I9638
SEAL
307, E70B
307, E70B
0947548
SEAL
307, E110, E120, E70, E70B
307, E110, E120, E70, E70B
0961884
SEAL
307, E70, E70B
307, E70, E70B
1624677
SEAL KIT
315
315
315
315
1133466
SEAL
311, 311B, 312B, 315, 315B, 315B FM L, 320B, 320B FM LL, 320N, 322, 322B, 325, 325B, 330, 330B
311, 311B, 312B, 315, 315B, 315B FM L, 320B, 320B FM LL, 320N, 322, 322B, 325, 325B, 330, 330B
1059524
SEAL
315, 325, 330, 330 FM L
315, 325, 330, 330 FM L
307