3E9413 SEAL Caterpillar parts
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 1...
Rating:
Alternative (cross code) number:
CA3E9413
3E-9413
3E9413
CA3E9413
3E-9413
3E9413
Weight: 0.01 pounds 0 kg.
Information:
BODY PANEL THICKNESS
4.5
mm
HEIGHT
35.96
mm
TYPE
000000000001
WIDTH
15.78
mm
MATERIAL
EPDM - 66 Duro
GLASS PANEL THICKNESS
6.8
mm
ASPHALT PAVER, WHEEL LOADER,
This part in 4 request:
Show.
This information for suppliers only!
2023-10-06
2019-03-08
2017-11-06
2017-03-14
Compatible equipment models: 3E9413:
INTEGRATED TOOLCARRIER
IT38G II
LANDFILL COMPACTOR
836H
MOTOR GRADER
120H
120H ES
120H NA
120K
120K 2
120M
120M 2
12H
12H ES
12H NA
12K
12M
135H
135H NA
140H
140H ES
140H NA
140K
140K 2
140M
140M 2
143H
14H
14H NA
160H
160H ES
160H NA
160K
160M
160M 2
163H
163H NA
16H
16H NA
TRACK-TYPE TRACTOR
D6G
WHEEL DOZER
854K
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Drain the engine oil into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Drain the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g02159716
Remove bolts (1) and (3).
Disconnect fitting (4) and remove the oil level gauge (2).
Illustration 2 g02159686
Disconnect hose assembly (5).
Disconnect hose assemblies (6).
Illustration 3 g02159692
Remove stud bolts (9). Remove bolts (7) and remove the oil filter base (8).
Illustration 4 g02159825
Remove engine oil cooler (10) and remove the gasket.
Illustration 5 g02159826
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (11) and remove spring (12). Remove valve (13) and remove the O-ring seal from oil filter base (8).
Illustration 6 g02159694
Remote Oil Filter Base
Disconnect hose assemblies (14). Use Tooling (A) in order to remove oil filter (15).
Illustration 7 g02159835
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (19) and remove spring (18). Remove valve (17) and remove the O-ring seal from the remove oil filter base (16). Installation Procedure
Install engine oil filter base (8) in the reverse order of removal.
Illustration 8 g02159879
Torque Sequence
Tighten bolts (7) and stud bolts (9) in the numerical sequence that is shown.
Lubricate the seal that is found on the oil filter assembly (1) with clean engine oil. Install the oil filter assembly hand tight. Tighten the oil filter assembly (1). Then, turn three quarters of a turn.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1
Drain the engine oil into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change".
Drain the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change".
Illustration 1 g02159716
Remove bolts (1) and (3).
Disconnect fitting (4) and remove the oil level gauge (2).
Illustration 2 g02159686
Disconnect hose assembly (5).
Disconnect hose assemblies (6).
Illustration 3 g02159692
Remove stud bolts (9). Remove bolts (7) and remove the oil filter base (8).
Illustration 4 g02159825
Remove engine oil cooler (10) and remove the gasket.
Illustration 5 g02159826
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (11) and remove spring (12). Remove valve (13) and remove the O-ring seal from oil filter base (8).
Illustration 6 g02159694
Remote Oil Filter Base
Disconnect hose assemblies (14). Use Tooling (A) in order to remove oil filter (15).
Illustration 7 g02159835
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove plug (19) and remove spring (18). Remove valve (17) and remove the O-ring seal from the remove oil filter base (16). Installation Procedure
Install engine oil filter base (8) in the reverse order of removal.
Illustration 8 g02159879
Torque Sequence
Tighten bolts (7) and stud bolts (9) in the numerical sequence that is shown.
Lubricate the seal that is found on the oil filter assembly (1) with clean engine oil. Install the oil filter assembly hand tight. Tighten the oil filter assembly (1). Then, turn three quarters of a turn.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
9W7215
SEAL GP-DUO-CONE
16G, 16H NA
16G, 16H NA
9D6588
SEAL-LIP TYPE
16G, 16H, 16H NA, 16M
16G, 16H, 16H NA, 16M
8D3307
SEAL
16G, 16H, 16H NA, 16M
16G, 16H, 16H NA, 16M
3290411
SEAL-LIP TYPE
120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H, 160K, 160M, 160M 2, 163H
120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 160H, 160K, 160M, 160M 2, 163H
2287467
SEAL-WIPER
120H, 120H NA, 12H, 12H NA, 135H, 135H NA, 140H, 140H NA, 143H, 160H, 160H NA, 163H NA
120H, 120H NA, 12H, 12H NA, 135H, 135H NA, 140H, 140H NA, 143H, 160H, 160H NA, 163H NA
2035957
SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14M, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16M
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14M, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16M
2035958
SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA
1731007
SEAL
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
1010509
SEAL-INTEGRAL
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H ES, 12H NA, 12K, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16H, 16H NA, 24H
2824350
SEAL-LIP TYPE
160H, 160H ES, 160H NA, 163H NA
160H, 160H ES, 160H NA, 163H NA
2824351
SEAL-LIP TYPE
120H, 120H NA, 135H, 135H NA
120H, 120H NA, 135H, 135H NA
1757901
SEAL-O-RING
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
8I5824
SEAL-WINDOW
TH62, TH63, TH82, TH83
TH62, TH63, TH82, TH83
1367336
SEAL-WINDOW
RT100, TH103, TH62, TH63, TH82, TH83
RT100, TH103, TH62, TH63, TH82, TH83
7K9208
SEAL-LIP TYPE
215, 215B, 215C, 215D, 219D, 422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 525D, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 920, 924G, 924GZ, 924H, 924HZ, 924K, 926, 926A, 928F, ...
215, 215B, 215C, 215D, 219D, 422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 525D, 631E, 631G, 633D, 633E II, 637D, 637E, 637G, 920, 924G, 924GZ, 924H, 924HZ, 924K, 926, 926A, 928F, ...
8Q2832
SEAL-O-RING
RT100, TH62, TH63, TH82, TH83
RT100, TH62, TH63, TH82, TH83
8Q2841
SEAL-O-RING
RT100, TH103, TH62, TH63, TH82, TH83
RT100, TH103, TH62, TH63, TH82, TH83
8I4096
SEAL-O-RING
RT100, RT50, TH62, TH63, TH82, TH83
RT100, RT50, TH62, TH63, TH82, TH83
1417449
SEAL-ROD
TH62
TH62
1417448
SEAL-PISTON
TH62
TH62
8Q6024
SEAL-O-RING
RT50, TH62
RT50, TH62
8Q5945
SEAL-O-RING
RT100, RT50, TH62
RT100, RT50, TH62
0975373
SEAL-O-RING
RT50, TH62
RT50, TH62
2951295
SEAL
3034, 3054, 3054B, 3056, 307, 312C, 416B, 416C, 416D, 420D, 424D, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, C3.3, CB-534C, CB-535B, CP-433C, CS-431C, CS-433C, M312, M315, PF-290...
3034, 3054, 3054B, 3056, 307, 312C, 416B, 416C, 416D, 420D, 424D, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 554, C3.3, CB-534C, CB-535B, CP-433C, CS-431C, CS-433C, M312, M315, PF-290...