SEAL ASSEM. 3N2724 - Caterpillar

Inspect the condition of the panel. If a component is damaged, ensure that the component is repaired or that the component is replaced. If equipped, ensure that the electronic displays are operating properly. Inspect the wiring for good condition. Ensure that the wiring connections are secure.Electronic Modular Control Panel 4 (EMCP 4.4)
Illustration 1 g03430615
(1) Display screen
(2) F4 Soft key
(3) F3 Soft key
(4) F2 Soft key
(5) F1 Soft key
(6) Control key
(7) AC overview key
(8) Engine overview key
(9) Main menu
(10) Warning Indicator lamp (yellow)
(11) Acknowledge alarm key and silence key
(12) Shutdown indicator lamp (red)
(13) Event reset key
(14) Event log key
(15) Run key
(16) Auto key
(17) Stop key
(18) Escape key
(19) Up key
(20) Right key
(21) OK key
(22) Down key
(23) Left key Perform the following steps in order to test the lamp on the EMCP 4 control panel:
Press the Main Menu button (9).
Scroll to and select Preferences.
Press the OK button.
Scroll to and select Lamp Test.
Press the OK button Switch Panel
The Panel Lights switch should turn on the panel lights. Toggle the switch in order to ensure that the panel lights are working.