SEAL 3S1751 - Caterpillar

Illustration 1 g01970794
Bolt locations
Illustration 2 g02589777
Left side view
Table 1
Specification for the 333-7644 Flywheel Housing Gp
Item Qty Part Specification Description
- - - Before installation of the flywheel housing, inspect the front face of the flywheel housing and the rear face of the cylinder block. The components must be free of the following substances: oil, fuel, water, gasket adhesive, assembly compounds, and any other foreign materials.
- - - To seal the joint between the flywheel housing and the cylinder block, apply blue Loctite High Flex GM to the mating surfaces.
1 6 9X-8873 Bolt Length of 1/2 inch diameter bolt is 57.15 mm (2.250 inch).
Torque to 135 20 N m (100 15 lb ft).
2 4 9X-8875 Bolt Length of 1/2 inch diameter bolt is 88.90 mm (3.500 inch).
Torque to 135 20 N m (100 15 lb ft).
3 2 9S-1374 Bolt Length of 1/2 inch diameter bolt is 203.20 mm (8.000 inch).
Torque to 135 20 N m (100 15 lb ft).
4 4 8S-9089 Bolt Length of 1/2 inch diameter bolt is 114.30 mm