4161295 SEAL-WIPER Caterpillar parts
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...
Rating:
Alternative (cross code) number:
CA4161295
416-1295
4161295
CA4161295
416-1295
4161295
Weight: 0.02 pounds 0 kg.
EXCAVATOR,
Compatible equipment models: 4161295:
Number on catalog scheme:
14
For full view, you need register
Information:
Castrol Tarp And Tarp-B
Castrol Tarp is a general rust preventative and preservative. It is used on parts such as crankshafts and engine blocks. Castrol Tarp-B is similar, except it has a blue color. The color helps obtain a uniform film thickness during a manual spray operation. On preserved parts, the blue color can disappear over time. Tarp and Tarp-B are all-purpose, self-healing, rust preventives. Tarp and Tarp-B have the following characteristics:
* Can be applied by brush, dip, or spray.* Are thixotropic, which means that if agitated, they will change from a gel to a liquid, and then if let stand, they will gel.* Normal applications have 4 to 11 mil (.004 to .011 in) film thickness.Tarp and Tarp-B offer the following protection:
* Withstands 5 percent salt spray for 1000 hours.* Withstands unsheltered ocean trips of 45 days.* Protects in all types of weather for 2 years.* Protects indoors for 3 to 5 years.Tarp and Tarp-B should be removed prior to part use to ensure that:
* No dust or dirt remains.* Small passages will not be temporarily restricted.* Mating surfaces will seat properly.Tarp and Tarp-B can be removed from unpainted surfaces, with 60°C (140.0°F) water and mild soap or alkaline cleaner. A 4100 kPa (600 psi) spray is effective at lower water temperatures. Do NOT use steam, because it will cause the Tarp or Tarp-B to harden. Be sure to use proper safety equipment when cleaning. If the part will not be immediately used, it should be blown dry and covered with light oil to prevent rust.
To remove Tarp and Tarp-B from a painted surface, use a cleaner with enough strength to insure adequate removal, yet mild enough to prevent damage to the underlying paint. Cleaning solutions with a PH of less than 9 are usually workable. The following process is recommended:
1. Spray with Castrol LT-10® (or equivalent), through a non-atomizing nozzle.2. Allow Tarp film to soften for 15 minutes.3. Remove the film with a 2 to 4 percent Castrol Lift-Off® solution (or equivalent) at 82°C (180°F). Use a high pressure spray gun equipped with a spade nozzle, held 6 to 12 inches from the part.4. Completely rinse with clear water.Castrol 4164
Castrol 4164 is a derivative of Tarp. Its characteristics differ from Tarp and Tarp-B in that Castrol 4164 has lower viscosity and is usually applied in film thickness of only 2 mil (.002 in). Castrol 4164 offers the following protection: * Protects in all types of weather for 8 months.* Protects indoors for a minimum of 3 years.
Castrol 4164 is the preferred preservative for engine cylinder heads, enging cylinder liners and engine cylinder kits. It can be distinguished from Tarp or Tarp-B by its lower viscosity and thinner film thickness. If the engine cylinder liners and engine cylinder liner kits, protected with 4164, are free of debris, they do not need to be cleaned prior to installation in an engine. However, if there are puddles of 4164, the puddles should be removed with a clean shop towel. Tests
Castrol Tarp is a general rust preventative and preservative. It is used on parts such as crankshafts and engine blocks. Castrol Tarp-B is similar, except it has a blue color. The color helps obtain a uniform film thickness during a manual spray operation. On preserved parts, the blue color can disappear over time. Tarp and Tarp-B are all-purpose, self-healing, rust preventives. Tarp and Tarp-B have the following characteristics:
* Can be applied by brush, dip, or spray.* Are thixotropic, which means that if agitated, they will change from a gel to a liquid, and then if let stand, they will gel.* Normal applications have 4 to 11 mil (.004 to .011 in) film thickness.Tarp and Tarp-B offer the following protection:
* Withstands 5 percent salt spray for 1000 hours.* Withstands unsheltered ocean trips of 45 days.* Protects in all types of weather for 2 years.* Protects indoors for 3 to 5 years.Tarp and Tarp-B should be removed prior to part use to ensure that:
* No dust or dirt remains.* Small passages will not be temporarily restricted.* Mating surfaces will seat properly.Tarp and Tarp-B can be removed from unpainted surfaces, with 60°C (140.0°F) water and mild soap or alkaline cleaner. A 4100 kPa (600 psi) spray is effective at lower water temperatures. Do NOT use steam, because it will cause the Tarp or Tarp-B to harden. Be sure to use proper safety equipment when cleaning. If the part will not be immediately used, it should be blown dry and covered with light oil to prevent rust.
To remove Tarp and Tarp-B from a painted surface, use a cleaner with enough strength to insure adequate removal, yet mild enough to prevent damage to the underlying paint. Cleaning solutions with a PH of less than 9 are usually workable. The following process is recommended:
1. Spray with Castrol LT-10® (or equivalent), through a non-atomizing nozzle.2. Allow Tarp film to soften for 15 minutes.3. Remove the film with a 2 to 4 percent Castrol Lift-Off® solution (or equivalent) at 82°C (180°F). Use a high pressure spray gun equipped with a spade nozzle, held 6 to 12 inches from the part.4. Completely rinse with clear water.Castrol 4164
Castrol 4164 is a derivative of Tarp. Its characteristics differ from Tarp and Tarp-B in that Castrol 4164 has lower viscosity and is usually applied in film thickness of only 2 mil (.002 in). Castrol 4164 offers the following protection: * Protects in all types of weather for 8 months.* Protects indoors for a minimum of 3 years.
Castrol 4164 is the preferred preservative for engine cylinder heads, enging cylinder liners and engine cylinder kits. It can be distinguished from Tarp or Tarp-B by its lower viscosity and thinner film thickness. If the engine cylinder liners and engine cylinder liner kits, protected with 4164, are free of debris, they do not need to be cleaned prior to installation in an engine. However, if there are puddles of 4164, the puddles should be removed with a clean shop towel. Tests
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
322C, 325D L, 329D, 329D L, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L
322C, 325D L, 329D, 329D L, 330C L, 330D L, 336D, 336D2, 340D L, 340D2 L
322C, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 326D L
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
322B, 324D, 324D L, 325B, 325C, 325D L, 326D L, 329D, 329D L, 330B, 330B L, 330C L, 330D, 330D L, 336D, 336D L, 336D2
1390, 2590, 320D, 320D FM, 320D2, 320D2 L, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 329D LN, 329E, 521B, 522B, 541, 541 2, 551, 552, 552 2
320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
4229123
SEAL-O-RING
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
4161309
SEAL AS-PISTON
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
4161311
SEAL-O-RING
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
4161306
SEAL-WIPER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 313D, 314D CR, 314D LCR, 314E CR, 314E LCR
3571950
SEAL
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
3571942
SEAL
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
4161273
SEAL-WIPER
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
4161302
SEAL AS-PISTON
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR, 320D, 320D L, 320D2, 320D2 L, 320E L, 320E LN, 324D L, 329D L, 329E, 3...