SEAL-O-RING 4186632 - Caterpillar

Illustration 1 g00687441
Enter the service mode. Scroll to the above display. Use the keys for direction.
Illustration 2 g00687447
The above illustration shows the "ID" status of the switch and the respective "ID" numbers. The following table should be used to identify the switch and the display. Highlight the third line. Use the directional keys in order to change the "ID". The example above shows the pressure switch for the joystick in the ON position.
Table 1
Status Of The Switch    
ID    Switch    Display    
1     Position of the engine speed dial     "1-10"    
2
(If Equipped)     Air heater relay
HEATING during preheating, OFF during NO preheating     "HEATING/OFF"    
3
( 318C, 319C, 320C, 321C, 322C, 325C, 330C)     Fine swing switch
Fine in switch ON, OFF in switch OFF     "FINE/OFF"    
4
( 322C ONLY)     Cranking signal input
ON when cranking, OFF in switch OFF position.     ON/OFF    
5
Not in 321C     Quick coupler switch
ON in switch ON position
OFF in switch OFF position     ON/OFF    
6     One-touch low idle switch
ON when pressed, OFF when not pressed     "ON/OFF"    
7     AEC mode switch
ON when pressed, OFF when not pressed     "ON/OFF"    
8     Travel mode switch
ON when pressed, OFF when not pressed     "ON/OFF"    
9     Travel alarm cancel switch
ON when pressed, OFF when not pressed     "ON/OFF"    
10     Pressure switch for the joystick
HIGH PRESS