SEAL-LIP TYPE 4194175 - Caterpillar

Illustration 1 g01261192
(1) Torque for two studs ... 30 4 N m (22 3 lb ft) (2) Torque for four bolts ... 30 4 N m (22 3 lb ft)
Illustration 2 g01593758
(3) Torque for the regulator ... 17 2 N m (13 1 lb ft) (4) Torque for two socket setscrews ... 25 2 N m (18 1 lb ft) (5) Torque for three bolts ... 7.0 0.4 N m (60 4 lb in)Use the following procedure to tighten the bolt (6) :
Apply 154-9731 Thread Lock Compound to the threads of the bolt.
Tighten the bolt to 200 N m (150 lb ft).
Back out the bolt for 180 degrees.
Again, tighten the bolt to 200 N m (150 lb ft).
Rotate the bolt to an angle of 31 2 degrees.
Final installation torque of the bolt is 500 50 N m (370 37 lb ft).
Illustration 3 g01593814
(A) Installation depth for the dowel ... 5.0 1.0 mm (0.20 0.04 inch) (C) Orientation of the regulator to 10 2 degrees
Illustration 4 g01632976
View B-B (7) Elbow (8) Torque for the O-ring connector ... 22 2 N m (16 1 lb ft) (9) Torque for two bolts ... 30 4 N m (22 3 lb ft) (10) Torque for two studs ... 30 4 N m (22 3 lb ft)
Illustration 5 g01632977
(11) Torque for the stop plug ... 4.5 0.5 N m (40 4 lb in)