4468432 SEAL-O-RING Caterpillar parts
G3516C, G3520C, G3520E
Rating:
Alternative (cross code) number:
CA4468432
446-8432
4468432
CA4468432
446-8432
4468432
Weight: 0.02 pounds 0 kg.
GENERATOR SET,
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
B 1U-8145 Drill Bit 1 Start By:
Remove the crankshaft vibration damper and pulley.
Illustration 1 g06251559Note: Do not damage the flange of the crankshaft during the removal of the seal.
Use Tooling (B) and carefully drill three evenly spaced holes in crankshaft front seal (1).
Alternate between the drilled holes and use Tooling (A) to remove crankshaft front seal (1).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 1U-7430 Front Seal Installer 1 Note: Ensure that the flange of the crankshaft and the front housing is thoroughly clean before you install the crankshaft front seal.
Illustration 2 g06251591Note: Crankshaft seal (1) is to be installed while on sleeve (2). Do not use crankshaft seal (1) if separated from sleeve (2).Note: Clamp plate (3) and bolts (4) are used to fasten the vibration damper adapter to the crankshaft.Note: The crankshaft seal is installed dry.
Position crankshaft seal (1) and sleeve (2) onto Tooling (C). Position Tooling (C), crankshaft seal (1) and sleeve (2) over crankshaft.
Use clamp plate (3), bolts (4), and Tooling (C) to install crankshaft seal (1).
Remove sleeve (2) from the crankshaft front seal. Ensure that the seal surface of the crankshaft pulley is thoroughly clean and dry. Ensure that the seal surface of the crankshaft pulley is in good condition.End By:
Install the crankshaft vibration damper and pulley.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
B 1U-8145 Drill Bit 1 Start By:
Remove the crankshaft vibration damper and pulley.
Illustration 1 g06251559Note: Do not damage the flange of the crankshaft during the removal of the seal.
Use Tooling (B) and carefully drill three evenly spaced holes in crankshaft front seal (1).
Alternate between the drilled holes and use Tooling (A) to remove crankshaft front seal (1).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 1U-7430 Front Seal Installer 1 Note: Ensure that the flange of the crankshaft and the front housing is thoroughly clean before you install the crankshaft front seal.
Illustration 2 g06251591Note: Crankshaft seal (1) is to be installed while on sleeve (2). Do not use crankshaft seal (1) if separated from sleeve (2).Note: Clamp plate (3) and bolts (4) are used to fasten the vibration damper adapter to the crankshaft.Note: The crankshaft seal is installed dry.
Position crankshaft seal (1) and sleeve (2) onto Tooling (C). Position Tooling (C), crankshaft seal (1) and sleeve (2) over crankshaft.
Use clamp plate (3), bolts (4), and Tooling (C) to install crankshaft seal (1).
Remove sleeve (2) from the crankshaft front seal. Ensure that the seal surface of the crankshaft pulley is thoroughly clean and dry. Ensure that the seal surface of the crankshaft pulley is in good condition.End By:
Install the crankshaft vibration damper and pulley.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
1251372
SEAL-O-RING
325C, 938G II, 966H, 966K, 966M XE, 972M XE, 980G II, D5N, D6N, D6R, D6R II, D7R XR, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520B, G3520C, G3520E, G3606, G3606B,...
325C, 938G II, 966H, 966K, 966M XE, 972M XE, 980G II, D5N, D6N, D6R, D6R II, D7R XR, G3508, G3508B, G3512, G3512B, G3512E, G3516, G3516B, G3516C, G3516E, G3516H, G3520B, G3520C, G3520E, G3606, G3606B,...
1922262
SEAL-INTEGRAL
G3512E, G3516C, G3516E, G3520B, G3520C, G3520E, PMG3516
G3512E, G3516C, G3516E, G3520B, G3520C, G3520E, PMG3516
4N1230
SEAL-O-RING
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 235B, 3406B, 3406C, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 235B, 3406B, 3406C, 3406E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F...
2764756
SEAL GP
365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 735, 740, 793D, 793F, 795F AC, 797, 797B, C15, C175-16, C18, G3516C, G3516E, G3520B, G3520C, G3520E, TH35-C15T
365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L, 385C L MH, 735, 740, 793D, 793F, 795F AC, 797, 797B, C15, C175-16, C18, G3516C, G3516E, G3520B, G3520C, G3520E, TH35-C15T
8L9241
SEAL-O-RING
10, 3516B, 518, 578, 583R, 589, 631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776C,...
10, 3516B, 518, 578, 583R, 589, 631E, 631G, 633E, 633E II, 637E, 637G, 651E, 657E, 657G, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776C,...
2289673
SEAL
G3512, G3516, G3520C
G3512, G3516, G3520C
9X7538
SEAL
3408, 3412, G3406, G3512E, G3516, G3516C, G3516E, G3520C, G3520E
3408, 3412, G3406, G3512E, G3516, G3516C, G3516E, G3520C, G3520E
2965820
SEAL
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
0951674
SEAL-O-RING
303.5C, 303C CR, 303E CR, 304D CR, 304E, 307, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 31...
303.5C, 303C CR, 303E CR, 304D CR, 304E, 307, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 31...
3E6788
SEAL-O-RING
14M, 16M, 325 L, 330, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3516B, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730...
14M, 16M, 325 L, 330, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3516B, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730...
2197000
SEAL-O-RING
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 627H, 627K, 725C, 966K, 972K, C15, C9.3, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D9T, G3512E, G3516C, G3516E, G3516H...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 627H, 627K, 725C, 966K, 972K, C15, C9.3, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D9T, G3512E, G3516C, G3516E, G3516H...
3369992
SEAL
G3512E, G3516B, G3516C, G3516E, G3520C, G3520E, PMG3516
G3512E, G3516B, G3516C, G3516E, G3520C, G3520E, PMG3516
9N1619
SEAL-O-RING
69D, 769D, 771D, 773D, 773E, 775D, 775E, G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
69D, 769D, 771D, 773D, 773E, 775D, 775E, G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
2197000
SEAL-O-RING
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 627H, 627K, 725C, 966K, 972K, C15, C9.3, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D9T, G3512E, G3516C, G3516E, G3516H...
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 627H, 627K, 725C, 966K, 972K, C15, C9.3, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E LGP, D9T, G3512E, G3516C, G3516E, G3516H...
3E6788
SEAL-O-RING
14M, 16M, 325 L, 330, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3516B, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730...
14M, 16M, 325 L, 330, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3516B, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730...
0951674
SEAL-O-RING
303.5C, 303C CR, 303E CR, 304D CR, 304E, 307, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 31...
303.5C, 303C CR, 303E CR, 304D CR, 304E, 307, 307B, 307C, 307D, 308C, 308D, 311, 311B, 311C, 311D LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D CR, 31...
2965820
SEAL
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
3003505
SEAL-O-RING
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C32
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C32
3369992
SEAL
G3512E, G3516B, G3516C, G3516E, G3520C, G3520E, PMG3516
G3512E, G3516B, G3516C, G3516E, G3520C, G3520E, PMG3516
3053447
SEAL
G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
G3512E, G3516C, G3516E, G3520C, G3520E, PMG3516
2034571
SEAL
G3512E, G3520C
G3512E, G3520C
2006555
SEAL
G3520C
G3520C
2065988
SEAL
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
G3512E, G3516B, G3516C, G3516E, G3516H, G3520C, G3520E, PMG3516
2617954
SEAL
G3520C, G3520E
G3520C, G3520E