SEAL 4540376 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-8622 Clevis 4 Start By:
Remove the ROPS.
Release the hydraulic system pressure.
Illustration 1 g02440896
Disconnect brake valve (1) from the underside of cab (2). Set brake valve (1) aside.
Illustration 2 g02440999
Disconnect hose assemblies (3). Disconnect cable assembly (4).
Illustration 3 g02441236
Disconnect ground cable (5).
Illustration 4 g02441256
Remove cover assembly (6).
Illustration 5 g02441396
Cut cable straps (8).
Disconnect harness assemblies (7).
Disconnect hose assemblies (9).
Remove cable clamps (10).
Illustration 6 g02441557
Disconnect cable assembly (12) and harness assembly (11). Remove cable clamp (13).
Illustration 7 g02441596
Disconnect hoses (14).
Illustration 8 g02442037
Attach Tooling (A) and a suitable lifting device to cab (2). The weight of cab (2) is approximately 1361 kg (3000 lb).
Illustration 9 g02442158
Remove floor mat (15).
Illustration 10 g02442162
Remove cover (16).
Illustration 11 g02442181
Remove bolt (17) and the washer.
Repeat Steps 13 and 14 for the other side of the cab.
Illustration 12 g02442188
Remove cover (18).
Illustration 13 g02442198
Remove bolt (19) and the washer.
Repeat Steps 16 and 17 for the opposite side of the machine.
Illustration 14 g02442037
Use Tooling (A) and the suitable lifting device in order to remove cab (2) from the machine.