SEAL 4540382 - Caterpillar

High Exhaust System Temperature (12) - This indicator illuminates when the CRS has reached regeneration temperature. Refer to the Operation and Maintenance Manual, "Diesel Particulate Filter Regeneration System" for information about the emissions status.
Machine Security System (13) - This indicator illuminates when the machine security system is activated.
Transmission Neutralizer (14) - This indicator illuminates when the transmission neutralizer is disabled.
Charging System (15) - This indicator illuminates when there is a problem with the battery charging system.
Implement Lockout (16) - This indicator illuminates when the implement lockout is set. The work tool will not move.
Secondary Steering (17) - This indicator illuminates when the secondary steering is functioning. When you turn the engine start switch to the ON position, the alert indicator for the secondary steering will come with an amber color on for 3 seconds. Then, the alert indicator will go off. If the alert indicator for the secondary steering does not come on, investigate the cause of the fault. Do not operate the machine until the fault has been corrected. The indicator will also illuminate a steady red color if there is a steering system fault.
Ride Control (18) - This indicator illuminates green when the ride control is activated. This indicator illuminates amber when the ride control is in automatic mode, but not active.
Hazard Lights (19) - This indicator illuminates when the hazard lights are activated.
Lift Linkage Float (20) - This indicator illuminates when the implement float is activated.
Engine Starting Aid (21) - This indicator illuminates when an engine starting aid is activated.
Autodig Status (22) - This indicator blinks when the autodig system is active. The indicator will be a steady amber color when the system is inactive. ReferenceRefer to Operation and Maintenance Manual, "Aggregate Autodig" for more detailed information.
High Beam Lights (23) - This indicator illuminates when the high beams are on.
Engine RPM (24) - This gauge displays the engine speed. LCD Screen (26)
Illustration 3 g02457377
LCD Screen on the Display ModuleThe LCD screen (26) provides readouts for the display module. The LCD screen displays the following items: machine operations, diagnostic events and modes of operation.If a fault indication occurs, the message will override any screen that was displayed on the monitoring system display.Note: You may snooze the fault display from the screen by pushing the OK button or the back button.The display module is used in order to change the customer preferences and operation parameters. This allows an additional means for the operator to increase machine efficiency.Tachometer (25)
The following range marks for engine speed are displayed on the tachometer (25) : White zone, Yellow zone and Red zone.
Engine Speed (White zone) - 0 - 2300 RPM
Engine Overspeed (Yellow zone) - "2300 RPM - 2500 RPM" is a visual warning. This indicates that the machine is approaching the maximum recommended speed. The monitoring system display will display a warning.
Engine Overspeed (Red zone) - +2500 RPM is a visual warning that the engine is overspeeding. The monitoring system display will display a warning. Do not allow the engine to