SEAL-LIP TYPE 4583063 - Caterpillar

Illustration 1 g06222913
Lower the temperature of bearing cup (23).
Use Tooling (B) to install bearing cup (23).
Illustration 2 g06222911
Use Tooling (B) to install seal (21) into housing (22).
Install retaining ring (20).
Illustration 3 g06222908
Illustration 4 g06222910
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install shim (18) and spring (19).
Use Tooling (B) and a suitable press to install retaining ring (17) into barrel (16).
Illustration 5 g06222907
Install pins (15).
Illustration 6 g06222905
Install bearing (14).
Illustration 7 g06222902
Install pistons (12) into retainer (13).
Illustration 8 g06222900
Install pistons (12) and retainer (13) into the barrel.
Illustration 9 g06222899
Install swashplate (11).
Illustration 10 g06222894
Install shaft (9).
Raise the temperature of bearing cone (10).
Install bearing cone (10) onto shaft (9).
Illustration 11 g06222891
Install rotating group (8).
Illustration 12 g06222890
Install spacer (7).
Illustration 13 g06222888
Install bearing cone (6).
Illustration 14 g06222886
Lower the temperature of bearing cup (5).
Install bearing cup (5), O-ring seal (3), and port plate (4).
Illustration 15 g06222885
Install head (2) and bolts (1). Tighten bolts (1) to a torque of 75 N m (55 lb ft).End By:
Install the piston motor (fan).