SEAL 4738315 - Caterpillar

1. Put a floor jack under the sliding floor jack and remove bolts (1), bar (2) and pin (3) that fasten the lock to the sliding arm assembly. 2. Remove the bolts (7), bar (5) and pin (4) that fasten the link to the sliding floor.3. Remove the floor link (6) from under the scraper. Weight of the floor link is 45 kg (100 lb.).Install Sliding Floor Link
1. Put sliding floor link (1) in position on the sliding floor and the sliding floor arm. 2. Install the pins (2) to both ends of the sliding floor link. Remove the floor jack.