SEAL-AIR 4756656 - Caterpillar

Table 1
ECM    Event Type    
Generator set Control     EMCP 3    
Engine Control     Advanced Diesel Engine Management (ADEM)    
Automatic Voltage Regulator (AVR) (requires CDVR)     Voltage Regulator    
Thermocouple (TC) Module (1)     Optional TC    
Resistive Temperature Device (RTD) Module     Optional RTD    
Discrete Input/Output (DI/O) Module (1)     Optional DI/O    
( 1 ) There may be more than one module.Note: On power up, the EMCP 3 displays the "MAIN MENU" screen. If the "MAIN MENU" screen is not displayed, then press the escape key (9) as many times as is necessary until the "MAIN MENU" appears. Each successive press of the escape key backs you up one level in the menu structure.Perform the following steps in order to view an event.
Using the scroll down key (12) or the scroll up key (13) , navigate within the "MAIN MENU" to "EVENT LOGS" and press the enter key . The "ACTIVE EVENTS" menu is displayed listing the connected ECM.Note: Events are organized by which ECM originated the event.
Select an ECM and press the enter key (10) . All of the events associated with the ECM will be displayed.
In order to scroll through the events, use the scroll up key (11) and the scroll down key (12) .
After highlighting an event, press the enter key (10) in order to see information about the event such as the SPN and the FMI.Press the scroll down key (12) in order to see additional information such as the following:
Time and date of first occurrence (not on version 3.1)
Time and date of last occurrence (not on version 3.1)
Engine hours at first occurrence
Engine hours at last occurrence