SEAL 4766079 - Caterpillar

"Setup Menu - Configuration"
Items in the "Setup Menu – Configuration" dialog include troubleshooting items as well as system variables and settings. As a default, some of these items are visible in service mode only, while other items are visible in all modes. The options are shown in Table 1.
Table 1
This Setup Menu Item    In These Modes, (By Default)    For More Information, Refer To    
"Select Design"     GPS and ATS Modes     Operation and Maintenance Manual, SEBU8501    
Bucket Focus     Depth and Slope Mode     Operation and Maintenance Manual, SEBU8501    
Select Bucket     All Modes     Operation and Maintenance Manual, SEBU8501    
"GPS Accuracy"     All Modes     Systems Operation, "GPS Accuracy Mode"    
UTS Accuracy     UTS Mode     Operation and Maintenance Manual, SEBU8501    
"Vertical Setup"     All Modes     Operation and Maintenance Manual, SEBU8501    
Measure Mode     Depth and Slope Mode     Operation and Maintenance Manual, SEBU8501    
Increment Adjustment     Depth and Slope Mode     Operation and Maintenance Manual, SEBU8501    
"Light bar Scales"     All Modes     Testing and Adjusting, "Light Bar Scale"    
Display and Light Bar Brightness     All Modes     Operation and Maintenance Manual, SEBU8501    
"Display and Light Bar Brightness Setting"     Service Mode     Systems Operation, "Brightness (Display and Light Bar)"    
"Map Recording"     Service Mode     Systems Operation, "Map Recording"    
"Avoidance Zone"     Service Mode     Systems Operation, "Avoidance Zone"    
"Text Items"     Service Mode     Systems Operation, "Text Items"    
"Beeper"     Service Mode     Systems Operation, "Beeper"    
"Save Settings"     Service Mode     Systems Operation, "Display Settings"    
"Restore Settings"     All Modes     Systems Operation, "Display Settings"    
"GPS Receiver Configuration"     All Modes     Systems Operation, "Receiver Configuration"    
"Select Radio Configuration"     Service Mode     Systems Operation, "Radio Utility"    
"Diagnostics"     Normal and Service Mode     Troubleshooting, "Diagnostic Capabilities"    "Setup Menu - Installation"
Items that are listed under the "Setup Menu - Installation" dialog include items used when you install or reinstall a AccuGrade system. The menu is also used in order to update the firmware for the devices. In order to access the "Setup Menu - Installation" dialog, press the "Installation" soft key. As a default the "Setup Menu - Installation" dialog is only available in service mode. The operator configuration can be customized so that some or all of the "Setup Menu - Installation" dialogs are available in normal mode.Depending on the current machine configuration, different options are available from the "Setup Menu - Installation" dialog. The options are shown in table 2.
Table 2
This "Setup Menu - Installation" Item    In These Modes, (By Default)    For More Information, Refer To    
"Machine Settings"     All Modes     Testing and Adjusting, "Machine Type - Configure"    
"Units"     All Modes     Systems Operation, "Display Units"    
"Machine Dimensions"     All Modes     Testing and Adjusting, "Machine Dimensions - Configure"    
"GPS Options Key" (1)     GPS Modes