AVSPARE.COM
parts catalog

SEAL-WIPER 4784183 - Caterpillar


4784183 SEAL-WIPER Caterpillar parts
Rating:
57
Alternative (cross code) number:
CA4784183
478-4183
4784183
Caterpillar 4784183 SEAL-WIPER
Weight: 0.06 pounds 0 kg.

Buy SEAL-WIPER 4784183 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:
  For full view, you need register

Information:


Illustration 1 g03538397
384-3698 Piston Body As (5)
Table 1
Specification for 384-4314 Piston and Rod Gp
Item Qty Part Specification Description
1 1 434-9020 Piston Ring Install with side marked "UP-1" toward top of the piston. The colored stripe faces to the right of the piston ring end gap.
Thickness of new top piston ring is 3.93 mm (0.155 inch).
Clearance of the ends when assembled in a new cylinder liner of bore 130.025 0.025 mm (5.1191 0.0010 inch) is 0.51 0.05 mm (0.020 0.002 inch).
2 1 331-6025 Piston Ring Install with side marked "UP-2" toward top of the piston. The colored stripe faces to the right of the piston ring end gap.
Thickness of new piston ring is 2.980 0.010 mm (0.1173 0.0004 inch)
Width (A) of the groove in the piston for piston is 3.0525 0.0125 mm (0.12018 0.00049 inch).
Clearance of the ends when assembled in a new cylinder liner of bore 130.025 0.025 mm (5.1191 0.0010 inch) is 1.00 0.10 mm (0.039 0.004 inch).
3 1 265-1113 Piston Ring The ends of the spring coil should be placed 180 degrees from the end gap of the oil control piston rings. The colored stripe in the spring coil must be visible at the oil control piston ring end gap.
Thickness of new oil control piston ring is 3.980 0.010 mm (0.1567 0.0004 inch).
Width (B) of the groove in the piston is 4.052 0.012 mm (0.1595 0.0005 inch).
Clearance of the ends when assembled in a new cylinder liner of bore 130.025 0.025 mm (5.1191 0.0010 inch) is 0.45 0.15 mm (0.018 0.006 inch).
- After installing the piston rings, rotate the piston rings so that the end gaps are placed at 120 degrees distance from each other.
Lubricate the entire piston to 360 degrees in zone (C) prior to assembly into the cylinder block. Use clean engine oil.
4 1 197-9327 Piston Pin Thoroughly lubricate the piston pin with clean engine oil prior to assembly.
Diameter is 53.155 0.005 mm (2.0927 0.0002 inch).
Length is 92.00 0.15 mm (3.622 0.006 inch).
Bore (D) in the piston body (5) for the piston pin is 53.250 0.010 mm (2.0965 0.0004 inch).

Caterpillar parts catalog:

Caterpillar parts catalog
930K ADL (Air Deployable Loader) HEG00001-UP (MACHINE) POWERED BY C7.1 Engine
930K Wheel Loader RHN00001-UP (MACHINE) POWERED BY C6.6 Engine
938K Wheel Loader SWL00001-UP (MACHINE) POWERED BY C6.6 Engine
930K Small Wheel Loader DYB00001-UP (MACHINE) POWERED BY C7.1 Engine
930K Small Wheel Loader EYE00001-UP (MACHINE) POWERED BY C7.1 Engine
938K Small Wheel Loader HFW00001-UP (MACHINE) POWERED BY C7.1 Engine
938K Small Wheel Loader XXT00001-UP (MACHINE) POWERED BY C7.1 Engine
930M Small Wheel Loader KTG00001-UP (MACHINE) POWERED BY C7.1 Engine
938M Small Wheel Loader J3R00001-UP (MACHINE) POWERED BY C7.1 Engine
938K Small Wheel Loader W8K00001-UP (MACHINE) POWERED BY C7.1 Engine
930K Small Wheel Loader FRK00001-UP (MACHINE) POWERED BY C7.1 Engine
938K Small Wheel Loader REP00001-UP (MACHINE) POWERED BY C7.1 Engine
930K Small Wheel Loader P3K00001-UP (MACHINE) POWERED BY C7.1 Engine


Parts seal Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.