SEAL-LIP TYPE 4800663 - Caterpillar

- Remove/Install
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Engine Air Filter Primary Element - Clean/Replace
Engine Air Filter Secondary Element - Replace
Engine Compartment - Clean
Film (Product Identification) - Clean
Fuel System - Prime
Fuses - Replace
Oil Filter - Inspect
Radiator and Hydraulic Oil Cooler - Clean
Tire Mat - Replace
Tire Scraper - Inspect/Adjust/Replace
Water Spray Nozzles - Clean
Water Spray System - Drain
Wheel Nuts - Tighten
Window Washer Reservoir - Fill
Window Wiper - Inspect/Replace
Windows - Clean
Every 10 Service Hours or Daily
Backup Alarm - Test
Cooling System Coolant Level - Check
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Water Spray System Filter - Clean
Water Tank Strainer - Clean and Inspect
Every 50 Service Hours or Weekly
Tire Inflation - Check
Initial 100 Service Hours
Final Drive Planetary Oil - Change
Every 100 Service Hours or 2 Weeks
Fuel Tank Water and Sediment - Drain
Every 250 Service Hours
Cooling System Coolant Sample (Level 1) - Obtain
Every 250 Service Hours or Monthly
Air Compressor Oil - Check
Final Drive Planetary Oil Level - Check
Steering Cylinder Ends - Lubricate
Every 250 Service Hours or 3 Months
Belts - Inspect/Adjust/Replace
Engine Oil Sample - Obtain
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Final Drive Planetary Oil Sample - Obtain
Fuel Tank Strainer - Clean
Every 500 Service Hours or 6 Months
Air Compressor Oil - Change
Braking System - Test
Engine Oil and Filter - Change
Fuel System Primary Filter (Water Separator) - Replace
Fuel System Secondary Filter - Replace
Hydraulic System Oil Sample - Obtain
Every 1000 Service Hours or 1 Year
Battery - Clean/Check
Cooling System Pressure Cap - Clean/Replace
Engine Mounts - Inspect
Final Drive Planetary Oil - Change
Hydraulic System Oil Filter - Replace
Hydraulic Tank Breather - Replace
Hydraulic Tank Strainer - Clean
Rollover Protective Structure (ROPS) - Inspect
Every 2000 Service Hours
Fuel Tank Cap Filter - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 18 Months
Hydraulic System Oil - Change
Suspension Cylinder Oil (Front) - Change
Every 3000 Service Hours or 2 Years
Cooling System Water Temperature Regulator - Replace
Every 3 Years
Seat Belt - Replace
Every 6000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 12 000 Service Hours or 6 Years
Cooling System Coolant (ELC) - Change