SEAL-O-RING 4833884 - Caterpillar

Illustration 1 g01743080
Disconnect clips (1). Remove cable strap (2). Disconnect harness assembly (3) .
Illustration 2 g01743076
Disconnect hose assemblies (4). Remove bolts (8). Position bracket (5), hoses (7), and harness assembly (6) out of the way.
Illustration 3 g01743081
Remove bolts (9). Remove caps (10) .
Illustration 4 g01743083
Remove pin assembly (11). Repeat for the other side.
Illustration 5 g01743133
Loosen five retaining nuts (12) and disconnect hose assemblies (13) .
Illustration 6 g01743694
Loosen three retaining nuts (14) and disconnect hose assemblies (15) .
Illustration 7 g01743777
Loosen retaining nuts (16) and disconnect hose assembly (17). Loosen retaining nut (18) and disconnect hose assembly (19) .
Illustration 8 g01743795
Disconnect hose assemblies (20). Repeat for opposite side.
Illustration 9 g01743877
Install Tooling (A) under the draft frame, as shown.
Illustration 10 g01745193
Install Tooling (B), Tooling (C) and a lift truck to the tractor, as shown.
Illustration 11 g01743879
Remove three bolts (22) and plate (23) from pin (21) .
Illustration 12 g01743933
Install the cribbing and Tooling (D), as shown. Use Tooling (D) to remove pin (24) from the machine.
Illustration 13 g01743934
Remove nut (26) and washer (25) from pin (27) .
Illustration 14 g01743973
Use a soft faced hammer to remove pin (27) and two shims from the machine. Separate the tractor and the scraper.