SEAL-O-RING 4908712 - Caterpillar

For Later Models6W-6661
For Earlier Models(1) Torque for nut ... 50 4 N m (37 3 lb ft)(2) 7V-3827 Spring (hidden) for transmission neutral lock lever: Length under test force ... 14.55 mm (.573 in)Test force ... 28.47 N (6.4 lb)Free length after test ... 19.12 mm (.753 in)Outside diameter ... 6.0 mm (.236)(3) Torque for two screws ... 30 7 N m (22 5 lb ft)(4) Torque for four locknuts ... 45 5 N m (33 4 lb ft)(5) Torque for four bolts ... 9 3 N m (7 2 lb ft)(9) Torque for two screws ... 30 7 N m (22 5 lb ft)(11) T-0278 Spring for steering column tilt lever: Length under test force ... 25.4 mm (1.00 in)Test force ... 47 3 N (10.5 .8 lb)Free length after test ... 35.8 mm (1.41 in)Outside diameter ... 17.93 mm (.706 in)Adjustment Of Tilt Lever
1. Thread nut (8) on shaft (6) until the steering column can not be tilted when lever (10) is raised.2. Loosen nut (8) until the steering column will move freely to another position.3. Tighten nut (7).