4I7473 SEAL-TRACK Caterpillar parts
311, 311B, 312, 312B, 313B, E110, E110B, E120B
Rating:
Alternative (cross code) number:
CA4I7473
4I-7473
4I7473
CA4I7473
4I-7473
4I7473
Weight: 0.01 pounds 0 kg.
EXCAVATOR,
Number on catalog scheme:
10
For full view, you need register
Information:
Illustration 65 g01142877
Raise the temperature of bearing cone (90) and install bearing cone (90) onto gear assembly (84).
Illustration 66 g01142487
Install plate (89). Install retaining ring (88) onto adapter (87).
Illustration 67 g01142464
Install adapter (87) onto gear assembly (84). Install retaining ring (86).
Illustration 68 g01142892
Raise the temperature of bearing cone (85) and install bearing cone (85) onto the other side of gear (84).
Illustration 69 g01142462
Install gear assembly (84).
Illustration 70 g01142455
Lower the temperature of bearing cup (82) and install bearing cup (82) into adapter (80). Do not install seal (83) at this time.
Illustration 71 g01142917
Attach a suitable lifting device and Tooling (J) to adapter (80). The weight of adapter (80) is approximately 30 kg (65 lb). Install adapter (80).
Illustration 72 g01142450
Install bolts (79). Tighten bolts (79) to a torque of 240 40 N m (177 30 lb ft). When possible, rotate either the torque converter or the outer housing to ensure that the bearings are properly seated.
Illustration 73 g01142914
Use Tooling (M) to check bearing end play. The bearing end play must be 0.15 0.05 mm (0.006 0.002 inch). Remove shims or add shims (91) that were previously installed to attain the correct bearing end play. Remove adapter (80).
Repeat Steps 69 through 78 for the other pump adapter.
Illustration 74 g01142455
Use Tooling (H) to install seal (83) into adapter (80). Lubricate seal (83) with clean oil. Bearing cup (82) was previously installed.
Illustration 75 g01142454
Install O-ring seals (81) to adapter (80).
Illustration 76 g01142917
Install the correct number of shims (91) that was determined in Step 78.
Attach a suitable lifting device and Tooling (J) to adapter (80). The weight of adapter (80) is approximately 30 kg (65 lb).
Install adapter (80).
Illustration 77 g01142450
Install bolts (79). Tighten bolts (79) to a torque of 240 40 N m (177 30 lb ft). When possible, rotate either the torque converter or the outer housing to ensure that the bearings are properly seated.
Use Tooling (M) to recheck the bearing end play. Refer to Step 78 for the correct procedure.
Repeat Steps 69 through 83 for the other pump adapter.End By:
Install the transmission oil pump. Refer to Disassembly and Assembly, "Transmission Oil Pump - Install" for the machine that is being serviced.
Install the torque converter outlet relief valve. Refer to Disassembly and Assembly, "Relief Valve (Torque Converter Outlet) - Install" for the machine that is being serviced.
Install the modulating valve for the torque converter impeller clutch. Refer to Disassembly and Assembly, "Modulating Valve (Torque Converter Impeller Clutch) - Install" for the machine that is being serviced.
Install the modulating valve for the torque converter lockup clutch. Refer to Disassembly and Assembly, "Modulating Valve (Torque Converter Lockup Clutch) - Install" for the machine that is being serviced.
Install the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Install" for the machine that is being serviced.
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
305.5E, 320 L, E120B, E180, E200B, E240, E240C, E70, E70B, EL240B
235, 311, 320B, 330, 330 L, 375, 375 L, 5080, 518C, 627B, 631G, 637G, 768C, 769C, 773B, 777, 777B, 814, 815, 816, 910, 920, 930, 950, 966C, 977K, D10, D7G, D8K
311
1390, 2590, 312, 320, 320 L, 320B, 320C, 320N, 322B, 322B L, 322B LN, 322C, 322C FM, 323D L, 324D, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325B L, 325C, 325C FM, 325C L, 325D...
311, 311B, 312B, 320B, 320N, 321B
311B
311, 311B, 312B, 320 L, 320B, 320N, E110, E110B, E120B, E200B
311B, 320B, 320C, 323D L
311B, 320B, 320B L, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 385B, 5090B, 797, 797B, W345B II
311B
311, E110B
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D L, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, 375 L, 385...
2384C, 2484C, 301.4C, 301.5, 301.6C, 301.7D, 301.7D CR, 302.2D, 302.4D, 302.5, 302.7D, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312...
215C, 235, 235C, 312, 312B, 320 L, 320B, 322, 322B L, 322B LN, 322C, 322C FM, 324D, 324D L, 324D LN, 325 FM L, 325B L, 325C, 325C FM, 330D, 336D L, 336D LN, 345B L, 345D, 350, 365B, 365B L, 375, 633E,...
311, 311B, 312, 315, 317, OEMS
0968039
SEAL
311, 311B, 312, 315, 317, E140, OEMS
311, 311B, 312, 315, 317, E140, OEMS
12M 3, 12M 3 AWD, 140M 3, 140M 3 AWD, 160M 3, 160M 3 AWD, 2384C, 2484C, 24M, 301.5, 301.6C, 302.5, 302.5C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305...
2384C, 2484C, 301.5, 301.6C, 302.5, 302.5C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 307, 307B...
311, 311B, 311C, 312, 312B, 312C, 312D, 313D2 LGP, 315, 315B, 315B L, 315C, 315D L, 316E L, 317, 318D L, 318D2 L, 320 L, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, E110B, E140, E200B, OEMS, PL61
311, 311B, 312, 312B, 312C, 315, 315B, 315B L, 315C, 317, 320 L, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, E200B, M318, M320, OEMS, PL61
2384C, 2484C, 303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312C,...
311, 311B, 311C, 312, 312B, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L...
312, 312B, 320 L, OEMS
205B, 211B, 215D, 312, 312B, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 320B L, 320C, 320D, 320D FM, 320D FM RR, 320D L, 323D L, 633E, D8N, OEMS