4W9032 SEAL-O-RING Caterpillar parts
3606, 3608, 3612, 3616, C280-12, C280-6, G3606, G3608, G3612, G3616
Rating:
Alternative (cross code) number:
CA4W9032
4W-9032
4W9032
CA4W9032
4W-9032
4W9032
Weight: 0.01 pounds 0 kg.
GAS ENGINE, MARINE ENGINE,
Compatible equipment models: 4W9032:
Number on catalog scheme:
9
For full view, you need register
Information:
Removal Procedure
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chocks - Remove and Install".
Illustration 1 g00506572Note: The following procedure illustrates the removal and installation of charging valve (1) from right rear suspension cylinder (2). This procedure can be used for the removal of the charging valve from the left rear suspension cylinder.Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 2 g00506576
Install blocking between frame assembly (3) and A-frame (4), before the nitrogen charge is released from suspension cylinder (2). The blocking is used in order to support the weight of frame assembly (3).
Release all nitrogen pressure from suspension cylinder (2). Refer to Suspension Cylinder Systems Operation/Testing and Adjusting, SENR1496, "Suspension Cylinder (Rear) - Purge and Charge" for the correct procedure.
Illustration 3 g00506579
Remove two bolts (5) and the washers. Remove guard (6).
Illustration 4 g00506604
Remove bolt (9), the washer, and the clip.
Disconnect wire harness (8) from payload pressure sensor (7) at the electrical connection.
Illustration 5 g00506610
Remove four bolts (10). Remove charging valve (1) and payload pressure sensor (7) from suspension cylinder (2) as a unit.
Plug the pressure ports on suspension cylinder (2). This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Start By:
Install the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chocks - Remove and Install".
Illustration 1 g00506572Note: The following procedure illustrates the removal and installation of charging valve (1) from right rear suspension cylinder (2). This procedure can be used for the removal of the charging valve from the left rear suspension cylinder.Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 2 g00506576
Install blocking between frame assembly (3) and A-frame (4), before the nitrogen charge is released from suspension cylinder (2). The blocking is used in order to support the weight of frame assembly (3).
Release all nitrogen pressure from suspension cylinder (2). Refer to Suspension Cylinder Systems Operation/Testing and Adjusting, SENR1496, "Suspension Cylinder (Rear) - Purge and Charge" for the correct procedure.
Illustration 3 g00506579
Remove two bolts (5) and the washers. Remove guard (6).
Illustration 4 g00506604
Remove bolt (9), the washer, and the clip.
Disconnect wire harness (8) from payload pressure sensor (7) at the electrical connection.
Illustration 5 g00506610
Remove four bolts (10). Remove charging valve (1) and payload pressure sensor (7) from suspension cylinder (2) as a unit.
Plug the pressure ports on suspension cylinder (2). This helps to prevent fluid loss and this helps to prevent contaminants from entering the system.
Cat SIS web machinery list:
Parts seal Caterpillar catalog:
3606, 3612, 980M, 982M, C11, C15, D6H, D6H II, D6H XL, D6H XR, D6R, D6R STD, D7H, D7R XR, D8N, D8R, D9R, G3516H, G3520C, G3520E, G3606, G3606B, G3608, G3612, G3616, TH35-C15T
12H, 12H ES, 12H NA, 12K, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 3406B, 3406C, 3406E, 3408, C-15, C-16, C15, CB-44B, CB-534D, CB-54B, CD-54, CD-54B, C...
3606, 3608, 3612, 3616, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 789, 789B, 789C, 789D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, CB-534D, CD-54, D250E II, D300E II, D350E ...
3612, 3616, 627B, 627E, 627F, 627G, 627H, 627K, 627K LRC, 637, 637B, 637D, 637E, 637G, 639D, 725, 725C, 730, 730C, D250B, D250D, D250E, D250E II, D25C, D25D, D300B, D300D, D300E, D300E II, D30C, D350C...
336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 3606, 3608, 365C, 365C L, 365C L MH, 374D L, 374F L, 375, ...
16, 24H, 24M, 3606, 3608, 641B, 650B, 651, 657, 666, 69D, 768B, 769, 769C, 769D, 770, 771C, 771D, 772, 772B, 772G, 772G OEM, 773, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 77...
561N, 572R, 572R II, 587T, 7155, 814B, 815B, 824C, 826C, 834B, 836, 950B, 950F, 966D, 966F, 980C, 980F, 988B, 992C, 994, D10R, D10T, D10T2, D11R, D11T, D5M, D5N, D6M, D6N, D6R, D6R II, D7R, D7R II, G3...
G3606, G3606B, G3608, G3612, G3616
G3606, G3608, G3612, G3616
G3606, G3606B, G3608, G3612, G3616
318C, 319C, 320 L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 32...
G3606, G3606B, G3608, G3612, G3616
3612, 3616, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, C175-16, C175-20, G3612, G3616
3612, 3616, G3612, G3616
24H, 24M, 3612, 3616, 5110B, 5130, 5130B, 5230, 5230B, 784B, 784C, 785B, 785C, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F, 844, 8...
2W4054
SEAL
3616, G3616
3616, G3616
1301300
SEAL-AFTERCOOLER
3612, 3616
3612, 3616
3612, 3616, C280-12, C280-16, G3612, G3616
3608, 3612, 3616, 3618, C280-12, C280-16, G3408, G3408B, G3412, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3606, G3608, G3612, G3616
1301832
SEAL-O-RING
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
1301833
SEAL-O-RING
3606, 3608, 3612, 3616
3606, 3608, 3612, 3616
4W9031
SEAL-O-RING
3606, 3608, 3612, 3616, C280-12, C280-6, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-6, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, C280-12, C280-6, G3606, G3608, G3612, G3616