AVSPARE.COM
parts catalog

SEAL A-RH 4Z8597 - Caterpillar



4Z8597 SEAL A-RH Caterpillar parts SEAL
Rating:
21
Alternative (cross code) number:
CA4Z8597
4Z-8597
4Z8597
Caterpillar 4Z8597 SEAL A-RH
Weight: 28 pounds 12 kg.

Buy SEAL A-RH 4Z8597 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Personal injury may occur when removing and installing windows in the operator station.The windows may break during removal or installation.Broken or cracked windows may have sharp edges that can cause cuts or lacerations.To avoid injury always ensure adequate personal protective equipment (protective glasses, face shield and gloves) are worn.
Incorrect window sealing (beading) may obstruct window removal and may cause inability to use alternate exit. Personal injury can result. Use the correct method of sealing (beading) to secure the operator's station windows. Contact your Caterpillar dealer for the correct sealing (beading) method.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 4C-9946 Tool 1
5H-4845 Seal Installer Gp 1
B - Molykote Silicone Lubricant 1
Illustration 1 g03891625
View of side alternate exit
Illustration 2 g06181721
View of side alternate exit from inside the operator station
Illustration 3 g03857401
View of rear alternate exit
Illustration 4 g06181722
View of rear alternate exit from inside the operator station
Disconnect the wiper washer hose and remove the wiper blade assembly.
Pull on locking strip tag (1) to remove the locking strip.Note: Use two people to remove the window.
From inside the operator station, exert steady outwards pressure on a corner of the window until the window separates from the operator station frame.
Remove the window and the seal strip.
Inspect each alternate exit for the following conditions.
Window frame rust
Missing components
Damaged or rusty locking strip tab
Damage, cracking, or hardening of the seal strip and locking strip
Replace any damaged, cracked, hardened, or missing components. Repair and repaint any rusted window frames.
Apply Tooling (B) between the cab window frame and the seal strip. Apply Tooling (B) between the window glass and the seal strip.
Install the seal strip, and the window.
Install the locking strip and locking strip tag (1). Position locking strip tag (1) as shown in illustration 1, illustration 2, illustration 3, and illustration 4.Note: Ensure that locking strip tags (1) are installed on the opposite side of the window to the join in the locking strip.
Install the wiper blade assembly and connect the wiper washer hose.
Repeat Step 1 through Step 10 for the other alternate exit.


Parts seal Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.