SEAL 5059274 - Caterpillar

Illustration 1 g00291493
Machines that are equipped with an extendable stick must have the transport pin in place for roading.Machines that are equipped with an extendable stick must remove the transport pin in order to operate the machine.
Illustration 2 g00732693
Center Pivot
Illustration 3 g00514301
Side ShiftMove the backhoe to the transport position in the following situations:
You are using the loader.
You are loading the machine on a truck or on a trailer.
You are roading the machine.
The bucket may hit the stabilizers oof the machine or the rear of the cab with certain boom and stick combinations. Always check for interference when first operating a new work tool.
Boom Transport Lock - Close the bucket and move in the stick completely. Move the boom upward until the boom is completely retracted.
Raise the boom to the full UP position.
Raise the boom lock lever in order to engage the boom lock.
Move the boom lever to the DOWN position in order to force the boom against the boom lock hook.Boom Swing Lock Pin - Install the pin when you are roading the machine for long distances or when you haul the machine on a truck or on a trailer.For machines that are equipped with All Wheel Steer, center the front wheels and rear wheels and place the steering mode switch in the two-wheel steer position before you transport the machine.Additional locking devices for work tools are required in some countries. Remove locking devices before operations begin.