SEAL-LIP TYPE 5137029 - Caterpillar

Illustration 19 g06003062
Boom cylinder
(F) Existing bolt
(G) Existing washer
(11) 368-3051 Hose As
(23) 448-0617 Tube As
(32) 8S-0023 Clip
(33) 8S-0024 Clip
Attach hose (11) to tube (23). Remove bolt (F) and washer (G) from the hose mounting group. Secure hose (11) to the hose mounting group, using one clip (32), one clip (33), and bolt (F).
Illustration 20 g06003065
(6) 109-1260 Bracket
(15) 424-0567 Hose As
(18) 446-3588 Bracket
(27) 150-3053 Connector As
(28) 268-1514 Union As
On the right-hand side of the boom, hand tighten the 397-1924 Permanent Coupling As of hose (15) to union (28) on bracket (18). Hand tighten the 432-2014 Coupling As of hose (15) to connector (27), on bracket (6).
Illustration 21 g06003069
(19) 446-3589 Bracket
(22) 448-0616 Tube As
(28) 268-1514 Union As
(31) 5K-9090 O-ring Seal
Connect the 6V-8557 Face Seal Nut of tube (22), with O-ring seal (31), to union (28) on bracket (19), on the left-hand side of the boom.
Illustration 22 g06003072
(H) Existing bolt
(K) Existing washer
(22) 448-0616 Tube As
(34) 8T-1889 Clip
(35) 8T-1890 Clip
Remove bolt (H) and washer (K) from the right-hand side of the hose mounting bracket. Using one clip (34), one clip (35), bolt (H), and washer (K), secure tube (22) to the hose mounting bracket.
Illustration 23 g03799345
Backhoe control valve
(8) 290-6712 Hose As
Connect the 6V-9969 Permanent Coupling As of hose (8) to port "A" of the auxiliary section of the backhoe valve.
Illustration 24 g03844915
(8) 290-6712 Hose As
Route hose (8) through the left-hand side of the swing frame.
Illustration 25 g06003074
(M) Existing bolt
(N) Existing washer
(8) 290-6712 Hose As
(22) 448-0616 Tube As
(32) 8S-0023 Clip
(33) 8S-0024 Clip
Attach hose (8) to tube (22). Remove bolt (M) and washer (N). Secure hose (8) to the hose mounting bracket, using one clip (32), one clip (33), and bolt (M) and washer (N).
Illustration 26 g06003077
(6) 109-1260 Bracket
(15) 424-0567 Hose As
(19) 446-3589 Bracket
(27) 150-3053 Connector As
(28) 268-1514 Union As
On the left-hand side of the boom, hand tighten the 397-1924 Permanent Coupling As of hose (15) to union (28) on bracket (19). Hand tighten the 432-2014 Coupling As of hose (15) to connector (27), on bracket (6).
Verify that the auxiliary hydraulic feature functions properly. Refer to the "Operator Controls" section in the Operation and Maintenance Manual for your machine.
Verify the hydraulic oil levels after initial operation of quick coupler. Refer to the "Hydraulic System Oil Level - Check" section in the Operation and Maintenance Manual for your machine.Reference: Operation and Maintenance Manual, SEBU9212 for center pivot machines.Reference: Operation and Maintenance Manual, SEBU9215 for side shift machines.