SEAL 5276592 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     4C-4089     Hydraulic Platform Jack     1    
Illustration 1 g00975341
Illustration 2 g00975167
Attach a suitable lifting device and a suitable lifting sling to power shift transmission (18). Install the power shift transmission on guard (19) and install four bolts (21). The weight of the power shift transmission is 155 kg (341 lb).
Use two persons and install the propel motor on the power shift transmission. Install the four bolts. The weight of the propel motor is 29 kg (64 lb).
Install guard (19), the power shift transmission, and the propel motor as a unit on Tooling (A). Install the guard, the power shift transmission, and the propel motor on the machine and install eight bolts (20) and four bolts (21). The weight of the guard, the power shift transmission, and the propel motor is 260 kg (573 lb).
Illustration 3 g00975166
Install hose assembly (17) on power shift transmission (18) .
Illustration 4 g00975165
Install clamp (16) on hose assembly (17) .
Install the cable straps that connect harness assembly (13) to guard (14) .
Connect two harness assemblies (15) .
Illustration 5 g00975164
Install hose assembly (12) .
Install bracket (11) and the two bolts.
Illustration 6 g00975162
Install brake (10) and four bolts (9) .
Illustration 7 g00975161
Install drive shaft (8) and four bolts (7) .
Illustration 8 g00975160
Install hose assembly (6) .
Illustration 9 g00975159
Install the cable strap that connects hose (5) to propel motor (3) .
Install three hose assemblies (4) on propel motor (3) .
Fill the oil in the power shift transmission. Refer to Operation and Maintenance Manual, "Rotor Transmission and Propel Transmission Oil - Change" for the correct procedure.
Illustration 10 g00975178
Install guard (2) and ten bolts (1) .End By: Install the left front tire. Refer to Disassembly and Assembly, "Tire and Rim (Front) - Remove and Install".