SEAL-INTEGRAL-YM 5424704 - Caterpillar

Torque for all 5/16 in. locknuts (jam nuts) that hold the rod ends on the rods ... 7 2 N m (5 1 lb ft)Torque for all 3/8 in. locknuts (jam nuts) that hold the rod ends on the rods ... 14 4 N m (10 3 lb ft) Adjustment Procedure1. Put the lift and tilt control valves in the HOLD position.2. Adjust the length of rod assemblies (3) and (4) so that control rod (1) is in a vertical position from side to side.3. Adjust the length of rod assembly for bulldozer lift and lower (not shown) so that control rod (1) is in a vertical position from front to rear. This rod is attached to lever (2).