SEAL KT 5439708 - Caterpillar

Table 3
Step Operation
1 Connect the pressure gauge to the pump pressure tap. Then press the "OK" key (15) in order to go to the next step.
2 Press the right key (9) or the left key (12) in order to increase or decrease the current value. Tune the pressure to the target. When you finish adjusting then press the "OK" key (15) to go to the next step.
3 Repeat step 2 for the new target value.
4 End of the calibration. Flow Limit Valve
Illustration 6 g01213306Perform the following steps in order to calibrate the Flow Limit Valve:
Main Menu
Service
Enter the "SERVICE" password.
Calibrations
Flow Limit Valve
Make the desired selection from the Flow Limit Valve screen. When a blue number is displayed, perform the operation