SEAL KT 5439710 - Caterpillar

Illustration 13 g01190158
Illustration 14 g01190156
Install pins (12), fittings (11) and plates (9) .
Remove pin (10) .
Illustration 15 g01190150
Steps 12 through 20 are for the assembly of shell (1) .
Illustration 16 g01190474
Illustration 17 g01190363
Use Tooling (C) in order to install the bearing in push bars (6). Install the bearings to a depth of 5 0.5 mm (0.2 0.02 inch).
Illustration 18 g01190475
Use Tooling (D) in order to install the seals in push bars (6) .
Illustration 19 g01190476
Illustration 20 g01190364
Use Tooling (C) in order to install the bearings in housing (7). Install the bearings to a depth of 5 0.5 mm (0.2 0.02 inch).
Illustration 21 g01190477
Use Tooling (D) in order to install the seals in housing (7) .
Illustration 22 g01190523
Use Tooling (E) and a suitable lifting device to position shell (1) on the housing, as shown. Refer to Table 4 for the correct weight of shell (1).
Table 4
Weights for the shell    
CZC
Demolition Shell
LH    
171 kg (377 lb)    
CZC
Demolition Shell
RH    
162 kg (357 lb)    
CZC
Recycling Shell
LH    
171 kg (377 lb)    
CZC
Recycling Shell
RH    
156 kg (344 lb)    
CZD
Demolition Shell
LH    
271 kg (597 lb)    
CZD
Demolition Shell
RH    
251 kg (553 lb)    
CZD
Recycling Shell
LH    
288 kg (635 lb)    
CZD
Recycling Shell
RH    
264 kg (582 lb)    
Illustration 23 g01190524
Use Tooling (F) to position shell (8) in order to install pins (5) in shell (1) and housing (7) .
Illustration 24 g01190152
Illustration 25 g01190151
Install fittings (4) and plates (2) .
Remove pin (3) .End By: Install the hydraulic cylinder. Refer to Disassembly and Assembly, "Hydraulic Cylinder - Remove and Install".