SEAL 5482688 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01379951
Disconnect harness assembly (1) . Remove the Clean Gas Induction pressure sensor (2) .Removal Procedure
(Delta P)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01379958
Disconnect harness assembly (3) .
Remove bolts (2) and remove Clean Gas Induction Delta Pressure sensor (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 3 g01379951
Install Clean Gas Induction pressure sensor (2) . Tighten pressure sensor (2) to a torque of 20 5 N m (15 4 lb ft). Connect harness assembly (1) .Installation Procedure
(Delta P)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 4 g01379958
Install Clean Gas Induction Delta Pressure sensor (1) and bolts (2) .
Connect harness assembly (3) .