SEAL 5594334 - Caterpillar

Centershift Lock Switch
Centershift Lock - The centershift lock switch is located at the operator's right, on the top of the shift console.Move the switch to the bottom position to engage the centershift lock. Push the latch tab and move the switch to the top position to disengage the centershift lock. When the centershift lock is disengaged an indicator light (3) will come on.Blade Cushion Switch (If Equipped)
The blade cushion switch is located at the operator's right, on the top of the transmission control console. Blade Cushion - Move the switch to the top position for blade cushion. Move the switch to the bottom position to turn blade cushion OFF.Left Blade Lift Lever
Left Blade Lift (1) - Pull the lever back to raise the left end of the blade. The lever will return to the Hold position when released. The blade will remain in the position it is in. Hold (2) - Release the left blade lift lever and the blade will remain in the position it is in. Left Blade Lower (3) - Push the lever forward to lower the left end of the blade. The lever will return to the Hold position when released. The blade will remain in the position it is in. Left Blade Float (4) - Push the lever all the way forward and release. The lever will remain in the detent position. The left end of the blade will float.Blade Sideshift Lever
Blade Sideshift Right (1) - Pull the lever back to shift the blade to the right. The lever will return to the Hold position when released. The blade will remain in the position it is in. Hold (2) - Release the blade sideshift lever and the blade will remain in the position it is in. Blade Sideshift Left (3) - Push the lever forward to shift the blade to the left. The lever will return to the Hold position when released. The blade will remain in the position it is in.Blade Circle Drive Lever
Blade Circle Drive Clockwise (1) - Pull the lever back to rotate the blade in a clockwise direction. The lever will return to the Hold position when released. The blade will remain in the position it is in. Hold (2) - Release the blade circle drive lever and the blade will remain in the position it is in. Blade Circle Drive Counterclockwise (3) - Push the lever forward to rotate the blade in a counterclockwise direction. The lever will return to the Hold position when released. The blade will remain in the position it is in.Blade Tip Lever
Blade Tip Back (1) - Pull the lever back to move the upper edge of the blade back. The lever will return to the Hold position when released. The blade will remain in the position it is in. Hold (2) - Release the blade tip lever and the blade will remain in the position it is in. Blade Tip Forward (3) - Push the lever forward to move the upper edge of