SEAL KT 5649195 - Caterpillar

5649195 SEAL KT Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5649195
564-9195
5649195

Weight: 0.22 pounds 0 kg.

Buy SEAL KT 5649195 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:

Caterpillar 5649195 Parts scheme SEAL KT

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1 Start By:
Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00612707
Remove plug (1) from the cylinder block.
Illustration 2 g00533095
Illustration 3 g00533096
Use Tooling (A) in order to remove the camshaft bearings from the cylinder block. Note: Refer to the instructions of the Camshaft Bearing Tool Group for the proper procedure.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8S-2241 Camshaft Bearing Tool Group 1
8H-0684 Ratchet Wrench 1
B 1U-8846 Gasket Sealant 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 4 g00533095
Illustration 5 g00533096
Use Tooling (A) in order to install the camshaft bearings into the cylinder block. Ensure that the oil hole of the camshaft bearings are in alignment with the oil ports in the engine block. Note: Refer to the instructions of the Camshaft Bearing Tool Group for the proper procedure.
Illustration 6 g00612707
Apply Tooling (B) to plug (1). Install plug (1) into the cylinder block. End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Remove and Install".