SEAL 5D2795 - Caterpillar

ACTION REQUIRED
Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
0-750 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 5.0-hour job for Group 1
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-750 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 5.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Note: Inspect all of the connections. Repair only if a leak is found.
Group 1, Inspection procedure for 963D: See Images 1.1.1 through 1.1.4. You will have to remove the belly guards to access the hydraulic pressure sensor and motor lines. Inspect as shown in the pictures. Look for leaks and repair as necessary. Check for good tightening at all connections shown.
Image1.1.1
Image1.1.2
Image1.1.3
Image1.1.4
Group 2, Inspection procedure for 953D: See Images 1.2.1 through 1.2.3. You will have to remove the belly guards to access the hydraulic pressure sensor and motor lines. Inspect as shown in the pictures. Look for leaks and repair as necessary. Check for good tightening at all connections shown.
Image1.2.1
Image1.2.2
Image1.2.3