SEAL 5F2422 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the air cleaners.
Illustration 1 g06089217
Remove hose assembly (1) and tube assembly (2).
Remove the water tube assemblies, if necessary.
Illustration 2 g06089467
Remove the bolts and elbow (3). Remove the O-ring seals from the elbow.
Loosen clamp (4). Slide the clamp away from turbocharger (5).
Illustration 3 g06089477
Attach a suitable lifting device to turbocharger (5). The weight of turbocharger (5) is approximately 40 kg (88 lb).
Remove the bolts that attach turbocharger (5) to the exhaust manifold. Remove turbocharger (5) and the gasket.