5I7524 SEAL Caterpillar parts
311, 311B, 311C, 312, 312B, 312C, 312C L, 314C, 318C, 319C, 320, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321B, 321C, 323D L, 323D LN
Rating:
Alternative (cross code) number:
CA5I7524
5I-7524
5I7524
CA5I7524
5I-7524
5I7524
Weight: 0.01 pounds 0 kg.
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$6.35
05 Aug 2022
0.1102[0.05] Pounds
US: TakePart
CTP Caterpillar Seal (5i7524)
CTP
CTP
$14.50
08 Jul 2022
US: # 1 Quality Par
Aftermarket replacement 5I7524 Cat Seal
Generic P009171, 5I7524, M-5I7524, Cat Seal, Cat, Seal 5I7524, Cat
Generic P009171, 5I7524, M-5I7524, Cat Seal, Cat, Seal 5I7524, Cat
$13.14
20 Apr 2022
US: Florida-Parts-Z
5I7524 - Seal for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
21
For full view, you need register
Compatible equipment models: 5I7524:
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01205958
Illustration 2 g00604752
Apply clean engine oil to sleeve bearings (10). Use Tooling (B) to install sleeve bearings (10) to body (3).
Position the joints in sleeve bearings (10) for 45 15 degrees from the center of the bearing bore. See Item (11) in Illustration 2.
Illustration 3 g01206054
Install sleeve bearings (10) to a depth of 1.5 0.5 mm (0.06 0.02 inch) in body (3). See Item (12) in Illustration 3.After installing sleeve bearings (10), measure the inner diameter of sleeve bearings (10). The inner diameter must be 31.837 0.070 mm (1.2534 0.0028 inch).
Illustration 4 g01205955
Apply clean engine oil to idler shaft assembly (9) and drive shaft assembly (8). Install idler shaft assembly (9) and drive shaft assembly (8) into body (3).
Illustration 5 g01206056
Apply clean engine oil to sleeve bearings (4). Use Tooling (B) to install sleeve bearings (4) in cover (6). Position the joints in sleeve bearings (4) for 45 15 degrees from the center of the bearing bore. See Item (13) in Illustration 5.Install sleeve bearings (4) to a depth of 1.5 0.5 mm (0.06 0.02 inch). See Item (14) in Illustration 5.After installing sleeve bearings (4), measure the inner diameter of sleeve bearings (4). The diameter must be 31.837 0.070 mm (1.2534 0.0028 inch).
Install dowels (5) into cover (6). Install dowels (5) so that dowels (5) protrude 6.4 0.5 mm (0.25 0.02 inch) from the surface of cover (6). See Item (15) in Illustration 5.
Illustration 6 g01206142
Illustration 7 g01206144
Align the marks on cover (6) and body (3) and position cover (6). Install bolts (7).Note: Clean gear (2) and tapered portion of the shaft with solvent. Remove excess oil from shaft assembly (8).
Refer to Specifications , "Engine Oil Scavenge Pump" for positioning and torque procedures.End By:
Install the engine oil scavenge pump. Refer to Disassembly and Assembly, "Engine Oil Scavenge Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01205958
Illustration 2 g00604752
Apply clean engine oil to sleeve bearings (10). Use Tooling (B) to install sleeve bearings (10) to body (3).
Position the joints in sleeve bearings (10) for 45 15 degrees from the center of the bearing bore. See Item (11) in Illustration 2.
Illustration 3 g01206054
Install sleeve bearings (10) to a depth of 1.5 0.5 mm (0.06 0.02 inch) in body (3). See Item (12) in Illustration 3.After installing sleeve bearings (10), measure the inner diameter of sleeve bearings (10). The inner diameter must be 31.837 0.070 mm (1.2534 0.0028 inch).
Illustration 4 g01205955
Apply clean engine oil to idler shaft assembly (9) and drive shaft assembly (8). Install idler shaft assembly (9) and drive shaft assembly (8) into body (3).
Illustration 5 g01206056
Apply clean engine oil to sleeve bearings (4). Use Tooling (B) to install sleeve bearings (4) in cover (6). Position the joints in sleeve bearings (4) for 45 15 degrees from the center of the bearing bore. See Item (13) in Illustration 5.Install sleeve bearings (4) to a depth of 1.5 0.5 mm (0.06 0.02 inch). See Item (14) in Illustration 5.After installing sleeve bearings (4), measure the inner diameter of sleeve bearings (4). The diameter must be 31.837 0.070 mm (1.2534 0.0028 inch).
Install dowels (5) into cover (6). Install dowels (5) so that dowels (5) protrude 6.4 0.5 mm (0.25 0.02 inch) from the surface of cover (6). See Item (15) in Illustration 5.
Illustration 6 g01206142
Illustration 7 g01206144
Align the marks on cover (6) and body (3) and position cover (6). Install bolts (7).Note: Clean gear (2) and tapered portion of the shaft with solvent. Remove excess oil from shaft assembly (8).
Refer to Specifications , "Engine Oil Scavenge Pump" for positioning and torque procedures.End By:
Install the engine oil scavenge pump. Refer to Disassembly and Assembly, "Engine Oil Scavenge Pump - Install".
Caterpillar parts catalog:
Parts seal Caterpillar catalog:
320C, 320D, 320D L, 320E L, 325C, 325C L, 325D, 325D L, 328D LCR, 329D, 329D L, 330C L
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
323D L, 323D LN, 324D, 324D FM, 324D L, 324D LN, 324E L, 324E LN, 325D, 325D FM, 325D L, 329D L, 329D LN, 329E L, 329E LN, 330D L
320D, 320D FM, 320D L, 320D2, 320D2 L, 320E LN, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 324D FM, 324D L, 324E, 324E L, 324E LN, 325D, 325D L, 326D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 323E L, 324D, 3...
320D, 320D L, 320D2, 320D2 L, 320E, 320E L, 320E LN, 325D, 325D L, 328D LCR, 329D, 329D L, 329E, 329E L, 329E LN
320 L, 320N, 322, 322 FM L, 322 LN, E110, E180, E200B, E240, E240C, E300B, EL240B, OEMS
320 L, 320N
320 L
320, 320N
320N, 322B, 325 L, 325B, 330, 330B, 330B L
1761957
SEAL
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
1761956
SEAL
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
1761954
SEAL
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
1613695
SEAL
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
307C, 307D, 311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 318C, 318D L, 318D2 L, 319D L, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC...
1786567
SEAL-O-RING
311C, 312C, 312C L, 314C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN
311C, 312C, 312C L, 314C, 318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM RR, 320D LRR, 320D RR, 321C, 321D LCR, 323D L, 323D LN
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN, E110, E110B, E120B, E200B, E70
311, 311B, 311C, 312B, 312C, 312C L, 314C, 318C, 319C, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D LRR, 320N, 321C, 323D L, 323D LN
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 3...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320N
311, 311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320B L, 320C, 320C FM, 320C L, 320D, 320D FM...